LM139ADT 查看數據表（PDF） - STMicroelectronics
零件编号
产品描述 (功能)
生产厂家
LM139ADT Datasheet PDF : 19 Pages
| |||
LM139, LM239, LM339
Absolute maximum ratings and operating conditions
2
Absolute maximum ratings and operating conditions
Table 1.
Symbol
Absolute maximum ratings
Parameter
Value
Unit
VCC
VID
VIN
Rthja
Rthjc
Supply voltage
Differential input voltage
Input voltage
Output short-circuit to ground (1)
Thermal resistance junction to ambient(2)
DIP14
SO-14
TSSOP14
QFN16 3x3
Thermal resistance junction to case (2)
DIP14
SO-14
TSSOP14
QFN16 3x3
±18 or 36
±36
-0.3 to +36
Infinite
80
105
100
45
33
31
32
14
V
V
V
°C/W
°C/W
Tstg
Tj
TLEAD
ESD
Storage temperature range
Junction temperature
Lead temperature (soldering 10 seconds)
Human body model (HBM)(3)
Machine model (MM)(4)
Charged device model (CDM)(5)
-65 to +150
°C
+150
°C
260
°C
500
100
V
1500
1.
Short-circuits from the output to VCC+ can
maximum output current is approximately
cause
20 mA
excessive heating and eventual destruction.
independent of the magnitude of VCC+.
The
2. Short-circuits can cause excessive heating. These values are typical.
3. Human body model: a 100 pF capacitor is charged to the specified voltage, then discharged through a
1.5 kΩ resistor between two pins of the device. This is done for all couples of connected pin combinations
while the other pins are floating.
4. Machine model: a 200 pF capacitor is charged to the specified voltage, then discharged directly between
two pins of the device with no external series resistor (internal resistor < 5 Ω). This is done for all couples of
connected pin combinations while the other pins are floating.
5. Charged device model: all pins and the package are charged together to the specified voltage and then
discharged directly to the ground through only one pin. This is done for all pins.
Doc ID 2159 Rev 3
3/19
Share Link: 