MJW16206 查看數據表（PDF） - Motorola => Freescale

零件编号

产品描述 (功能)

生产厂家

MJW16206

POWER TRANSISTORS

Motorola => Freescale 

TEST CONDITIONS FOR ISOLATION TESTS*

MJW16206

MOUNTED

FULLY ISOLATED

PACKAGE

LEADS

MOUNTED

FULLY ISOLATED

PACKAGE

0.099” MIN

LEADS

HEATSINK

0.110” MIN

HEATSINK

Figure 19. Screw or Clip Mounting Position

for Isolation Test Number 1

Figure 20. Screw or Clip Mounting Position

for Isolation Test Number 2

* Measurement made between leads and heatsink with all leads shorted together.

MOUNTING INFORMATION**

4–40 SCREW

CLIP

PLAIN WASHER

HEATSINK

COMPRESSION WASHER

NUT

HEATSINK

Figure 21. Typical Mounting Techniques*

Laboratory tests on a limited number of samples indicate, when using the screw and compression washer mounting technique, a screw

torque of 6 to 8 in . lbs is sufficient to provide maximum power dissipation capability. The compression washer helps to maintain a con-

stant pressure on the package over time and during large temperature excursions.

Destructive laboratory tests show that using a hex head 4-40 screw, without washers, and applying a torque in excess of 20 in . lbs will

cause the plastic to crack around the mounting hole, resulting in a loss of isolation capability.

Additional tests on slotted 4-40 screws indicate that the screw slot fails between 15 to 20 in . lbs without adversely affecting the pack-

age. However, in order to positively ensure the package integrity of the fully isolated device, Motorola does not recommend exceeding 10

in . lbs of mounting torque under any mounting conditions.

** For more information about mounting power semiconductors see Application Note AN1040.

Motorola Bipolar Power Transistor Device Data

9

Share Link: