ARA210A05Z 查看數據表（PDF） - Panasonic Corporation
零件编号
产品描述 (功能)
生产厂家
ARA210A05Z Datasheet PDF : 5 Pages
| |||
RA (ARA)
2. Specifications
Characteristics
Contact
Rating
High frequency
characteristics
(Initial) (~1GHz,
Impedance 50Ω)
Item
Arrangement
Contact material
Initial contact resistance, max.
Contact rating
Contact carrying power
Max. switching voltage
Max. switching current
Nominal
operating
power
Single side stable
1 coil latching
2 coil latching
Isolation
Between open contacts
Between contact sets
Insertion loss (without D.U.T. board’s loss)
V.S.W.R.
Input power
Insulation resistance (Initial)
Electrical
characteristics
Breakdown
voltage
(Initial)
Between open contacts
Between contact sets
Between contact and coil
Between contact and earth terminal
Temperature rise (at 20°C)
Operate time [Set time] (at 20°C)
Mechanical
characteristics
Expected life
Release time [Reset time] (at 20°C)
Shock
resistance
Vibration
resistance
Mechanical
Functional
Destructive
Functional
Destructive
Electrical
Conditions
Unit weight
Conditions for operation, transport and storage*
Specifications
2 Form C
Stationary: AgPd + Au clad, Movable: AgPd
Max. 75mΩ (By voltage drop 6V DC 1A)
10mA 10V DC (resistive load), 1A 30V DC (resistive load)
3W (at 1GHz, impedance 50Ω, V.S.W.R. max.1.2)
30V DC
1A
140mW (1.5 to 12V), 200mW (24V), 300mW (48V)
70 mW (1.5 to 12V), 100mW (24V)
140mW (1.5 to 12V), 200mW (24V)
Min. 20dB
Min. 30dB
Max. 0.3dB
Max. 1.2
3W (at 1GHz, impedance 50Ω, V.S.W.R. max.1.2)
Min. 100MΩ (at 500V DC)
Measurement at same location as “Initial breakdown voltage” section.
750 Vrms for 1min. (Detection current: 10mA)
1,000 Vrms for 1min. (Detection current: 10mA)
1,000 Vrms for 1min. (Detection current: 10mA)
1,000 Vrms for 1min. (Detection current: 10mA)
Max. 60°C
(By resistive method, nominal voltage applied to the coil, 1GHz, 3W, V.S.W.R. max.1.2)
Max. 4ms (Approx. 2ms) [Max. 4ms (Approx. 2ms)] (Nominal operating voltage applied to
the coil, excluding contact bounce time.)
Max. 4ms (Approx. 1ms) [Max. 4ms (Approx. 2ms)] (Nominal operating voltage applied to
the coil, excluding contact bounce time.) (without diode)
Min. 500 m/s2 (Half-wave pulse of sine wave: 11ms; detection time: 10µs.)
Min. 1,000 m/s2 (Half-wave pulse of sine wave: 6ms.)
10 to 55 Hz at double amplitude of 3mm (Detection time: 10µs.)
10 to 55 Hz at double amplitude of 5mm
Min. 108 (at 180 cpm)
Min. 107 (at 20 cpm) (10mA 10V DC resistive load)
Min. 105 (at 20 cpm) (1A 30V DC resistive load)
Ambient temperature: –40°C to +85°C –40°F to +185°F
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
Approx. 2 g .07 oz
Note: * The upper operation ambient temperature limit is the maximum temperature that can satisfy the coil temperature rise value. Refer to [6] AMBIENT ENVIRONMENT
in GENERAL APPLICATION GUIDELINES.
REFERENCE DATA
1-(1). High frequency characteristics (Impedance 50Ω)
Sample: ARA200A12
Measuring method: Measured with HP network analyzer (HP8753C).
• V.S.W.R.
1.5
• Insertion loss
0
1.4
0.2
0.3
1.3
0.4
1.2
1.1
1.0
300kHz
COM-NC
COM-NO
0.5GHz
Frequency
1.0GHz
0.6
0.8
1.0
300kHz
COM-NO
COM-NC
0.5GHz
Frequency
1.0GHz
• Isolation
0
20
30
40
60
COM-NC
COM-NO
CONTACT sets
80
100
300kHz
0.5GHz
Frequency
1.0GHz
ASCTB102E 201202-T
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
Share Link: 