OPB815 查看數據表（PDF） - Optek Technology
零件编号
产品描述 (功能)
生产厂家
OPB815 Datasheet PDF : 3 Pages
| |||
Deep Gap Slotted Switch with Wire and
Connector Options
OPB815L, OPB815WZ Series
Absolute Maximum Ratings (TA=25°C unless otherwise noted)
Storage & Operating Temperature Range
Lead Soldering Temperature [1/16 inch (1.6mm) from the case for 5 sec. with soldering iron]
Input Infrared LED
Continuous Forward Current
Reverse Voltage
Power Dissipation(2)
Output Phototransistor
Collector-Emitter Voltage
Emitter-Collector Voltage
Power Dissipation(2)
-40° C to +80° C
260° C
50 mA
2V
100 mW
30 V
5V
100 mW
Electrical Characteristics (TA = 25°C unless otherwise noted)
SYMBOL
PARAMETER
MIN TYP MAX UNITS
TEST CONDITIONS
Input Infrared LED (see OP240 for additional information)
VF
Forward Voltage
- - 1.7
IR
Reverse Current
- - 100
Output Phototransistor (see OP550 for additional information)
V IF = 20 mA
µA VR = 2 V
V(BR)CEO Collector-Emitter Breakdown Voltage 30 -
-
V IC = 1 mA
V(BR)ECO Emitter-Collector Breakdown Voltage
5
-
-
v IE = 100 µA
ICEO Collector-Emitter Dark Current
-
- 100 nA VCE = 10 V, IF = 0, EE = 0
Coupled
VCE(SAT) Collector-Emitter Saturation Voltage
IC(ON) On-State Collector Voltage
--
3.5 -
0.4
V IC = 500 µA, IF = 20 mA
16
mA VCE = 10 V, IF = 20 mA
Notes:
(1) All wires are 26 AWG stranded, UL rated.
(2) Derate linearly 1.67mW/°C above 25° C.
(3) Methanol or isopropanol are recommended as cleaning agents. The plastic housing is soluble in chlorinated hydrocarbons and
keytones.
(4) All parameters tested using pulse techniques.
Top to Bottom
0
Left to Right
Emitter
Right to Left
Sensor
0
Width
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A.1 02/07
Page 2 of 3
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Share Link: 