T315XW02-V1 查看數據表（PDF） - AU Optronics
零件编号
产品描述 (功能)
生产厂家
T315XW02-V1 Datasheet PDF : 28 Pages
| |||
www.DataSheet4U.net
3. Measurement condition :
90%
GND
10%
Trush = 470 uS
4. VCIM = 1.2V
VTH
VCIM
VTL
VCC
0V
5. The performance of the Lamp in LCM, for example life time or brightness, is extremely influenced by
the characteristics of the DC-AC Inverter. So all the parameters of an inverter should be carefully
designed so as not to produce too much leakage current from high-voltage output of the inverter. When
you design or order the inverter, please make sure unwanted lighting caused by the mismatch of the
lamp and the inverter (no lighting, flicker, etc) never occurs. When you confirm it, the LCD Assembly
should be operated in the same condition as installed in your instrument.
6. Do not attach a conducting tape to lamp connecting wire. If the lamp wire attach to conducting tape,
TFT-LCD Module have a low luminance and the inverter has abnormal action because leakage current
occurs between lamp wire and conducting tape.
7. The relative humidity must not exceed 80% non-condensing at temperatures of 40℃ or less. At
temperatures greater than 40℃, the wet bulb temperature must not exceed 39℃. When operate at low
temperatures, the brightness of CCFL will drop and the life time of CCFL will be reduced.
©Copyright AU Optronics, Inc.
January, 2003 All Rights Reserved.
T315XW02 V1 - Specs. ver 0.1
8/28
No Reproduction and Redistribution Allowed
Share Link: 