PS7221A-2A-F3-A 查看數據表（PDF） - California Eastern Laboratories.

零件编号

产品描述 (功能)

生产厂家

PS7221A-2A-F3-A

8-PIN SOP, 260 V BREAK DOWN VOLTAGE NORMALLY OPEN TYPE 2-ch Optical Coupled MOS FET

California Eastern Laboratories. 

PS7221A-2A

RECOMMENDED SOLDERING CONDITIONS

(1) Infrared reflow soldering

• Peak reflow temperature

260°C or below (package surface temperature)

• Time of peak reflow temperature

10 seconds or less

• Time of temperature higher than 220°C

60 seconds or less

• Time to preheat temperature from 120 to 180°C 120±30 s

• Number of reflows

Three

• Flux

Rosin flux containing small amount of chlorine (The flux with a

maximum chlorine content of 0.2 Wt% is recommended.)

Recommended Temperature Profile of Infrared Reflow

180˚C

120˚C

120±30 s

(preheating)

(heating)

to 10 s

to 60 s

260˚C MAX.

220˚C

Time (s)

(2) Wave soldering

• Temperature

• Time

• Preheating conditions

• Number of times

• Flux

260°C or below (molten solder temperature)

10 seconds or less

120°C or below (package surface temperature)

One

Rosin flux containing small amount of chlorine (The flux with a maximum chlorine

content of 0.2 Wt% is recommended.)

<R> (3) Soldering by soldering iron

• Peak temperature (lead part temperature) 350°C or below

• Time (each pins)

3 seconds or less

• Flux

Rosin flux containing small amount of chlorine (The flux with a

maximum chlorine content of 0.2 Wt% is recommended.)

(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead.

(b) Please be sure that the temperature of the package would not be heated over 100°C.

(4) Cautions

• Fluxes

Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.

Data Sheet PN10300EJ02V0DS

9

Share Link: