3KP100A 查看數據表（PDF） - StarHope
零件编号
产品描述 (功能)
生产厂家
3KP100A Datasheet PDF : 6 Pages
| |||
SPSEMI
3KP(3000W) Series
Glass Passivated Junction Transient Voltage Suppressor
Stand-Off Voltage - 5.0 to 220 Volts
3000 Watt Peak Pulse Power
Features
Plastic package has Underwriters Laboratory
Flammability Classification 94V-O
Glass passivated junction
3000W Peak Pulse Power capability on 10/1000μs waveform
Excellent clamping capability
Repetition rate (duty cycle):0.05%
Low incremental surge resistance
Fast response time: typically less than 1.0ps from 0 Volts to BV min.
Typical IR less than 2A above 10V
High temperature soldering guaranteed: 265°C/10 seconds/.375",
(9.5mm) lead length, 5lbs., (2.3kg) tension
Pb-free plated
Mechanical Data
Case: JMolded plastic over glass passivated junction
Terminals: Solderable per MIL-STD-750,Method 2026
Polarity: Color band denotes positive end (cathode) except Bipolar
Mounting Position: Any
Weight: 0.07 ounce, 2.1 grams
Devices For Bipolar Application
For Bidirectional use C or CA Suffix for types 3KP5.0 thru types 3KP220 (e.g. 3KP5.0C , 3KP220CA)
Electrical characteristics apply in both directions
Maximum Ratings And Characteristics
Ratings at 25℃ambient temperature unless otherwise specified.
RATING
SYMBOL VALUE
UNITS
Peak Pulse Power Dissipation on 10/1000μs waveform (Note 1,FIG.1)
PPPM
Minimum
3000
Watts
Peak Pulse Current of on 10/1000μs waveform (Note 1,FIG.3)
Steady State Power Dissipation at TL =75℃,Lead
lengths.375",(9.5mm) (Note 2)
Peak Forward Surge Current,8.3ms Single Half Sine-Wave
Superimposed on Rated Load,(JEDEC Method) (Note3)
IPPM
P M ( AV )
IFSM
SEE
TABLE 1
7
300
Amps
Watts
Amps
Operating junction and Storage Temperature Range
TJ , TSTG
-55 to
+175
℃
Notes :
1.Non-repetitive current pulse , per Fig. 3 and derated above TA = 25℃ per Fig. 2 .
2.Mounted on Copper Pad area of 1.6×1.6" (40×40mm) per Fig. 5
3.8.3ms single half sine-wave , or equivalent square wave, Duty cycle = 4 pulses per minutes maximum.
REV.2016.08.10
www.spsemi.cn
Page 1 of 6
Share Link: 