PS396 查看數據表（PDF） - Pericom Semiconductor Corporation
零件编号
产品描述 (功能)
生产厂家
PS396 Datasheet PDF : 10 Pages
| |||
PS396
11223344556677889900112233445566778899001122334455667788990011221122334455667788990011223344556677889900112233445566778899001122112233445566778899001122334455P66r7788e99c0011is2233io4455n6677,8819900611-22C1122h3344a5566n77n8899e00l11,223314475566V7788A9900n1122a3344lo5566g7788M990011u2211l22t33ip4455l66e77x8899e00r1122
Absolute Maximum Ratings
Voltages Referenced to GND
V+ ............................................................................ –0.3Vto+17V
V– ............................................................................ +0.3Vto–17V
V+ to V– .................................................................. –0.3Vto+17V
Voltage into any terminal(1) ............................ (V– –2V) to (V+ +2V)
or 30mA, whichever occurs first
Current into any terminal ................................................... ±30mA
Peak current into any terminal ........................................... ±50mA
Continuous power Dissipation (TA = +70°C)
Wide SO (derate 12.50mW/°C above +70°C) .............. 1000mW
SSOP (derate 9.52mW/°C above +70°C) ........................762mW
Operating Temperature Ranges
PS39_C_I ............................................................... 0°C to +70°C
PS39_E_I ........................................................... –40°C to +85°C
Storage Temperature Range ............................... –65°C to +150°C
Lead Temperature (soldering, 10s) .................................... +300°C
Note 1:
Signals on any terminal exceeding V+ or V– are clamped by internal diodes. Limit forward current to maximum current rating.
CAUTION
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating
and operation of the device at these or any other conditions beyond those indicated in the operational sections of this specification is
not implied.
Electrical Characteristics — Dual Supplies
(V+ = +5V ±10%, V– = –5V ±10%, GND = 0V, VAH = VENH = 2.4V, VAL = VENL = 0.8V, TA = TMin to TMax, unless otherwise noted.)
Parameter
Symbol
Conditions
Switch
Analog Signal Range
Channel
ON-Resistance
ON-Resistance Matching
Between Channels(4)
On-Resistance Flatness(5)
NO Off-Leakage
Current(6)
COM Off-Leakage
Current(6)
VCOM, VNO (note 3)
RO N
INO = 1mA,
VCOM = ±3.5V
∆RON
INO = 1mA,
VCOM = ±3.5V,
V+ = 5V, V– = –5V
RF LAT(O N )
INO = 1mA,
VCOM = ±3.0V,
V+ = 5V, V– = –5V
IN O (O F F )
VNO = ±4.5V,
VCOM = ±4.5V,
V+ = 5.5V,
V– = –5.5V
IC O M (O F F )
VCOM = ±4.5V,
VNO = ±4.5V,
V+ = 5.5V,
V– = –5.5V
COM On-Leakage
Current(6)
IC O M (O N )
VCOM = ±4.5V,
VNO = 4.5V
Temperature
Range
Min.(2) Typ.(2) Max.(2) Units
TA = +25°C
TA = TMIN to TMAX
TA = +25°C
TA = TMIN to TMAX
TA = +25°C
TA = TMIN to TMAX
TA = +25°C
TA = TMIN to TMAX
TA = +25°C
TA = TMIN to TMAX
TA = +25°C
TA = TMIN to TMAX
V–
–80
–100
–80
–100
–80
–100
60
1.8
5
–0.03
V+
V
100
125
6
Ohm
8
10
13
80
100
0.05
80
nA
100
0.09
0.4
5
Table conitinued over..
3
PS8443E
12/18/02
Share Link: 