PCA85133(2009) 查看數據表（PDF） - NXP Semiconductors.

零件编号

产品描述 (功能)

生产厂家

PCA85133
(Rev.:2009)

Universal LCD driver for low multiplex rates

NXP Semiconductors. 

NXP Semiconductors

PCA85133

Universal LCD driver for low multiplex rates

Bias is calculated by 1-----+1-----a-- , where the values for a are

a = 1 for 1⁄2 bias

a = 2 for 1⁄3 bias

The RMS on-state voltage (Von(RMS)) for the LCD is calculated with Equation 1

V on(RMS) = V LCD n--a---2×----+-(--1--2---a+-----+a----)n--2-

(1)

where the values for n are

n = 1 for static mode

n = 2 for 1:2 multiplex

n = 3 for 1:3 multiplex

n = 4 for 1:4 multiplex

The RMS off-state voltage (Voff(RMS)) for the LCD is calculated with Equation 2:

V off (RMS) = V LCD n--a---×2----–-(--1-2----a+----+-a----)n--2-

(2)

Discrimination is the ratio of Von(RMS) to Voff(RMS) and is determined from Equation 3:

D = V-V-----oo--f-n-f-(-(-R-R--M-M---S-S--)-) = (-(--aa-----+–-----11---)-)--22----++-----((--nn----–-–----11----))

(3)

Using Equation 3, the discrimination for an LCD drive mode of 1:3 multiplex with

1⁄2 bias is 3 = 1.732 and the discrimination for an LCD drive mode of 1:4 multiplex with

1⁄2 bias is ----3-2---1-- = 1.528 .

The advantage of these LCD drive modes is a reduction of the LCD full scale voltage VLCD

as follows:

• 1:3 multiplex (1⁄2 bias): V LCD = 6 × V off (RMS) = 2.449V off (RMS)

• 1:4 multiplex (1⁄2 bias): V LCD = (---4-----×--3-------3----) = 2.309V off (RMS)

These compare with V LCD = 3V off (RMS) when 1⁄3 bias is used.

It should be noted that VLCD is sometimes referred as the LCD operating voltage.

PCA85133_1

Product data sheet

Rev. 1 — 23 October 2009

© NXP B.V. 2009. All rights reserved.

7 of 44

Share Link: