MB90352 查看數據表（PDF） - Cypress Semiconductor

零件编号

产品描述 (功能)

生产厂家

MB90352

F2MC-16LX 16-bit Microcontroller

Cypress Semiconductor 

MB90350 Series

(Continued)

Part Number

Parameter

MB90356A,

MB90357A

MB90356TA, MB90356AS, MB90356TAS, MB90V340A- MB90V340A-

MB90357TA MB90357AS MB90357TAS

103

104

16-bit Input Capture

6 channels

8 channels

Retains freerun timer value by (rising edge, falling edge or rising & falling edge), signals an interrupt.

8/16-bit

Programmable Pulse

Generator

6 channels (16-bit)/10 channels (8-bit)

8-bit reload counters × 12

8-bit reload registers for L pulse width × 12

8-bit reload registers for H pulse width × 12

8 channels (16-bit)/16 channels

(8-bit)

8-bit reload counters × 16

8-bit reload registers for

L pulse width × 16

8-bit reload registers for

H pulse width × 16

Supports 8-bit and 16-bit operation modes.

A pair of 8-bit reload counters can be configured as one 16-bit reload counter or as

8-bit prescaler  8-bit reload counter.

Operation clock frequency : fsys, fsys/21, fsys/22, fsys/23, fsys/24 or 128 μs@fosc  4 MHz

(fsys  Machine clock frequency, fosc  Oscillation clock frequency)

1 channel

3 channels

CAN Interface

Conforms to CAN Specification Version 2.0 Part A and B.

Automatic re-transmission in case of error

Automatic transmission responding to Remote Frame

Prioritized 16 message buffers for data and ID

Supports multiple messages.

Flexible configuration of acceptance filtering :

Full bit compare/Full bit mask/Two partial bit masks

Supports up to 1 Mbps.

External Interrupt

8 channels

16 channels

Can be used rising edge, falling edge, starting up by H/L level input, external interrupt,

extended intelligent I/O services (EI2OS) and DMA.

D/A converter

—

2 channels

I/O Ports

Virtually all external pins can be used as general purpose I/O port.

All push-pull outputs

Bit-wise settable as input/output or peripheral module signal

Settable as CMOS schmitt trigger/ automotive inputs

TTL input level settable for external bus (only for external bus pin)

Flash Memory

—

Corresponding EVA

name

MB90V340A-104

MB90V340A-103

—

* : It is setting of Jumper switch (TOOL VCC) when Emulator (MB2147-01) is used.

Please refer to the Emulator hardware manual about details.

Document Number: 002-07872 Rev. *A

Page 11 of 83

Share Link: