HLMT-QH00-WX011(2001) 查看數據表（PDF） - Avago Technologies
零件编号
产品描述 (功能)
生产厂家
HLMT-QH00-WX011 Datasheet PDF : 11 Pages
| |||
5
Absolute Maximum Ratings at TA = 25°C
Parameter
HLMA-xxxx
HLMT-xxxx
Peak Forward Current[2]
100
100
Average Forward Current (IPEAK = 100 mA)[1,2]
30
37
DC Forward Current[3,5,6]
50
50
Power Dissipation
105
120
Reverse Voltage (IR = 100 µA)
5
Transient Forward Current (10 µs Pulse)[5]
500
Operating Temperature Range
–40 to +100
Storage Temperature Range
–55 to +100
LED Junction Temperature
110
Lead Soldering Temperature
[1.6 mm (0.063 in.) from body]
260°C for 5 seconds
SMT Reflow Soldering Temperatures
Convective Reflow
Vapor Phase Reflow
235°C Peak, above 183°C for 90 seconds
215°C for 3 minutes
Unit
mA
mA
mA
mW
V
mA
°C
°C
°C
Notes:
1. Maximum IAVG at f = 1 kHz.
2. Refer to Figure 5 to establish pulsed operating conditions.
3. Derate linearly as shown in Figure 4.
4. The transient peak current is the maximum non-recurring peak current these devices can withstand without damaging the LED die
and wire bonds. Operation at currents above Absolute Maximum Peak Forward Current is not recommended.
5. Drive currents between 10 mA and 30 mA are recommended for best long term performance.
6. Operation at currents below 5 mA is not recommended, please contact your Agilent sales representative.
CATHODE
TAB
NO. ANODE DOWN.
YES. CATHODE DOWN.
Proper Right Angle Mounting to a PC Board to Prevent Protruding Cathode Tab
from Shorting to Anode Connection.
Share Link: 