HCPL-5301 查看數據表（PDF） - HP => Agilent Technologies

零件编号

产品描述 (功能)

生产厂家

HCPL-5301

Intelligent Power Module and Gate Drive Interface Hermetically Sealed Optocouplers

HP => Agilent Technologies 

Intelligent Power Module

and Gate Drive Interface

Hermetically Sealed

Optocouplers

Technical Data

HCPL-5300

HCPL-5301

HCPL-530K

5962-96852

Features

• Performance Specified Over

Full Military Temperature

Range: -55°C to +125°C

• Fast Maximum Propagation

Delays

tPHL = 450 ns,

tPLH = 650 ns

• Minimized Pulse Width

Distortion (PWD = 450 ns)

• High Common Mode

Rejection (CMR): 10 kV/µs at

VCM = 1000 V

• CTR > 30% at IF = 10 mA

• 1500 Vdc Withstand Test

Voltage

• Manufactured and Tested on

a MIL-PRF-38534 Certified

Line

• Hermetically Sealed

Packages

• Dual Marked with Device

Part Number and DSCC

Drawing Number

• QML-38534, Class H and K

• HCPL-4506 Function

Compatibility

Applications

• Military and Space

• High Reliability Systems

• Harsh Industrial

Environments

• Transportation, Medical, and

Life Critical Systems

• IPM Isolation

• Isolated IGBT/MOSFET Gate

Drive

• AC and Brushless DC Motor

Drives

• Industrial Inverters

Description

The HCPL-530X devices consist

of a GaAsP LED optically coupled

to an integrated high gain photo

detector in a hermetically sealed

package. The products are

Schematic Diagram

1

8

20 kΩ

2

7

3

6

4

5

SHIELD

capable of operation and storage

over the full military temperature

range and can be purchased as

either standard product or with

full MIL-PRF-38534 Class Level

H or K testing or from the DSCC

Drawing 5962-96852. All devices

are manufactured and tested on a

MIL-PRF-38534 certified line and

are included in the DSCC

Qualified Manufacturers List

QML-38534 for Hybrid Micro-

circuits. Minimized propagation

delay difference between devices

make these optocouplers excellent

solutions for improving inverter

efficiency through reduced

switching dead time. An on chip

20 kΩ output pull-up resistor can

be enabled by shorting output

pins 6 and 7, thus eliminating the

need for an external pull-up

resistor in common IPM applica-

tions. Specifications and

performance plots are given for

typical IPM applications.

Truth Table

LED

VO

ON

L

OFF

H

The connection of a 0.1 µF bypass capacitor between pins 5 and 8 is recommended.

CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to

prevent damage and/or degradation which may be induced by ESD.

Share Link: