XE1414 查看數據表（PDF） - Xecom
零件编号
产品描述 (功能)
生产厂家
XE1414 Datasheet PDF : 15 Pages
| |||
AT Command List (continued)
&Cn - DCD Operation
n=0 DCD is forced active.
n=1 DCD indicates a valid carrier*
&Dn - DTR
n=0 DTR is ignored by the modem.
n=1 Modem switches to command mode when
DTR revoked.
n=2 Modem disconnects if DTR revoked.*
n=3 Perform soft reset when DTR revoked
&Fn - Return to Factory Defaults
n=0 Restore configuration 0*
n=1 Restore configuration 1
&Gn - Guard Tone
n=0 Guard Tone Disabled*
n=1 550 Hz Guard Tone
n=2 1800 Hz Guard Tone
&Kn - Flow Control
n=0 Disabled
n=3 RTS/CTS
n=4 XON/XOFF
n=5 Transparent XON/XOFF
n=6 RTS/CTS and XON/XOFF
&Ln - Line Type
n=0 Dial-up line operation
n=3 Dedicated (leased) line operation
&Pn - Dial Pulse Make/Break Ratio
n=0 39/61% @ 10 pps*
n=1 33/67% @ 10 pps
n=2 39/61% @ 20 pps
n=3 33/67% @ 20 pps
&Qn - Line Connection
n=0 Direct mode (no data buffering)*
n=5 Use Error Correction
n=2 Normal Mode (Speed buffering)
&Sn - DSR Operation
n=0 DSR always active*
n=1 DSR in accordance with V.25.
&Tn - Test Modes
n=0 Exit test mode
n=1 Local analog loopback
n=3 Initiate local digital loopback
n=4 Respond to remote loop request*
n=5 Deny remote loop request
n=6 Intiate a Remote Digital loopback
n=7 Remote digital loopback w self-test
n=8 Local analog loopback w self-test
&Vn - View Configuration Profiles
n=0 View active profile & user profile 0*
n=1 View active profile & user profile 1
&Wn - Store Active Profile
n=0 Store active profile as profile 0*
n=1 Store active profile as profile 1
&Zn=x - Store telephone number "x" in memory
location "n"
%En - Line Quality Monitor/Auto Retrain
n=0 Disabled
n=1 Enabled
n=2 Enable line quality and fallback / fall forward
%L - Read Recevied Signal Level
%Q - Read Line Signal Quality
\An - MNP Block Size
n=0 Maximum 64 characters
n=1 Maximum 128 characters
n=2 Maximum 192 characters
n=3 Maximum 256 characters*
\Bn - Transmit Break
\Gn - Set Modem Port Flow Control
n=0 Disables port flow control*
n=1 XON/XOFF port flow control
\Jn - DTE Rate Adjust
n=0 Serial port speed independent of link speed*
n=1 Serial port rate automatically changed to link
speed*
XECOM
(7)
XE1414
Share Link: 