HFBR-5208AEMZ 查看數據表（PDF） - Avago Technologies

零件编号

产品描述 (功能)

生产厂家

HFBR-5208AEMZ

1 x 9 Fiber Optic Transceivers for 622 Mb/s ATM/SONET/SDH Applications

Avago Technologies 

Electrostatic Discharge (ESD)

There are two design cases in which immunity to ESD damage

is important.

The first case is during handling of the transceiver prior to

mounting it on the circuit board. It is important to use normal

ESD handling precautions for ESD sensitive devices. These pre-

cautions include using grounded wrist straps, work benches,

and floor mats in ESD controlled areas, etc.

The second case to consider is static discharges to the exterior

of the equipment chassis containing the transceiver parts. To

the extent that the duplex SC connector receptacle is exposed

to the outside of the equipment chassis, it may be subject to

whatever ESD system level test criteria that the equipment is

intended to meet.

Electromagnetic Interference (EMI)

Most equipment designs utilizing these high-speed transceiv-

ers from Avago will be required to meet the requirements

of FCC in the United States, CENELEC EN55022 (CISPR 22)

in Europe and VCCI in Japan.

The HFBR-5208xxxZ EMI has been characterized with a

chassis enclosure to demonstrate the robustness of the

parts. Performance of a system containing these transceiv-

ers will vary depending on the individual chassis design.

Immunity

Equipment utilizing these transceivers will be subject to

radio-frequency electromagnetic fields in some environ-

ments. These transceivers, with their integral shields,

have been characterized without the benefit of a normal

equipment chassis enclosure and the results are reported

below. Performance of a system containing these trans-

ceivers within a well- designed chassis is expected to be

better than the results of these tests without a chassis

enclosure.

Regulatory Compliance - Targeted Specifications

Feature

Test Method

Performance

Electrostatic Discharge (ESD) MIL-STD-883F

Method 3015.7

Class 1 (>1000 V) - Human Body Model

RADIEC-61000-4-2

Products of this design typically withstand 25 kV

without damage.

Electromagnetic Interference FCC Class B

(EMI)

CENELEC EN55022

Class B (CISPR 22B) VCCI Class 2

Margins are dependant on customer board and

chassis design.

Immunity

Variation of IEC 61000-4-3

Typically show no measurable effect from a 10

V/m field swept from 26 to 1000 MHz applied to

the transceiver when mounted to a circuit card

without a chassis enclosure.

Eye Safety

IEC 825-1 Class 1

LED Class 1

Component Recognition

Underwriters Laboratories and Canadian

UL File#: E173874

Standards Association Joint Component

Recognition for Information Technology Equip-

ment including Electrical Business Equipment

The HFBR-5208xxxZ LED are classified as IEC 825-1 Accessible Emission Limit (AEL) Class 1. AEL Class 1 are considered eye safe.

9

Share Link: