LCX007CL
Important
(1) Anti-reflection coating
Use anti-reflection coating when using a phase-shifting plate on a light egress side of the LCD to align a
polarization axis with those of a polarization screen or a prism.
(2) Direction of incident light
Allow incident light to hit upon an opposite side of a mark-indicated surface.
Direction of incidence
Marking side
(3) Polarizer
This LCD is attached with a polarizer on a light egress side. A suitable heat-dissipation method shall be
incorporated to suppress optical degradation of a polarizer.
(4) Light source
• Use visible light (wavelength λ = 400 to 780nm) as a light source. Do not use a light source containing
infrared or ultraviolet components.
• Suppress leakage light (reflection light) into a backside of a panel to sufficiently weak level or shut it out
completely.
– 22 –