Product Specification
CPF906G
4.3.3. Filter Attenuation Test.
4.3.3.1. Test Equipment :
a . HP4395A Network / Spectrum / Impedance Analyzer
b . HP87512A Transmission / Reflection test set
c . Balun North Hills : 0311LB( 50Ω : 100Ω ) ;0415LB( 50Ω : 150Ω )
4.3.3.2. Test Setup: is shown in Fig. 3
4.3.3.3. Test Procedure :
a . Set HP4395A in B/R mode for attenuation test.
b . Connecting the Analyzer to the ISDN and line side of splitter through the North Hills
Balun 0311LB( 50Ω : 100Ω ) ;0415LB( 50Ω : 150Ω )
c . Set frequency of interest given in specification.
d . Calibrating the HP4395A network Analyzer via the thru for attenuation test .
e . Measurement attenuation.
ZADSL
0311LB
BALUN
ADSL
100OH
ISDN/PHONE
LINE
BALUN
0415LB
Fig.3 Test Setup
Data sheet subject to change without notice
RDPS-POTS344(R0)04/03/2002
SHEET 9 OF 16