EL2250 查看數據表（PDF） - Renesas Electronics

零件编号

产品描述 (功能)

生产厂家

EL2250

125MHz Single Supply Dual/Quad Op Amps

Renesas Electronics 

EL2250, EL2450

NOT RECOMMENDED FOR NEW DESIGNS

NO RECOMMENDED REPLACEMENT

contact our Technical Support Center at

1-888-INTERSIL or www.intersil.com/tsc

125MHz Single Supply Dual/Quad Op Amps

DATASHEET

FN7061

Rev 3.00

May 19, 2006

The EL2250/EL2450 are part of a family of the electronics

industry’s fastest single supply op amps available. Prior

single supply op amps have generally been limited to

bandwidths and slew rates to that of the EL2250/EL2450.

The 125MHz bandwidth, 275V/µs slew rate, and

0.05%/0.05° differential gain/differential phase makes this

part ideal for single or dual supply video speed applications.

With its voltage feedback architecture, this amplifier can

accept reactive feedback networks, allowing them to be

used in analog filtering applications. The inputs can sense

signals below the bottom supply rail and as high as 1.2V

below the top rail. Connecting the load resistor to ground

and operating from a single supply, the outputs swing

completely to ground without saturating. The outputs can

also drive to within 1.2V of the top rail. The EL2250/EL2450

will output ±100mA and will operate with single supply

voltages as low as 2.7V, making them ideal for portable, low

power applications.

The EL2250/EL2450 are available in PDIP and SO

packages in industry standard pin outs. Both parts operate

over the industrial temperature range of -40°C to +85°C, and

are part of a family of single supply op amps. For single

amplifier applications, see the EL2150/EL2157. For dual and

triple amplifiers with power down and output voltage clamps,

see the EL2257/EL2357.

Ordering Information

PART TAPE &

PKG.

PART NUMBER MARKING REEL PACKAGE DWG. #

EL2250CN

EL2250CN

-

8 Ld PDIP MDP0031

EL2250CS

2250CS

- 8 Ld SO MDP0027

EL2250CS-T7 2250CS

7” 8 Ld SO MDP0027

EL2250CS-T13 2250CS

13” 8 Ld SO MDP0027

EL2250CSZ

(Note)

2250CSZ

- 8 Ld SO MDP0027

(Pb-free)

EL2250CSZ-T7 2250CSZ

(Note)

7” 8 Ld SO MDP0027

(Pb-free)

EL2250CSZ-T13 2250CSZ

(Note)

13” 8 Ld SO MDP0027

(Pb-free)

EL2450CN

EL2450CN

-

14 Ld PDIP MDP0031

EL2450CS

2450CS

- 14 Ld SO MDP0027

EL2450CS-T7 2450CS

7” 14 Ld SO MDP0027

EL2450CS-T13 2450CS

13” 14 Ld SO MDP0027

NOTE: Intersil Pb-free plus anneal products employ special Pb-free

material sets; molding compounds/die attach materials and 100%

matte tin plate termination finish, which are RoHS compliant and

compatible with both SnPb and Pb-free soldering operations. Intersil

Pb-free products are MSL classified at Pb-free peak reflow

temperatures that meet or exceed the Pb-free requirements of

IPC/JEDEC J STD-020.

Features

• Specified for +3V, +5V, or ±5V applications

• Large input common mode range

0V < VCM < VS -1.2V

• Output swings to ground without saturating

• -3dB bandwidth = 125MHz

• ±0.1dB bandwidth = 30MHz

• Low supply current = 5mA (per amplifier)

• Slew rate = 275V/µs

• Low offset voltage = 4mV max

• Output current = ±100mA

• High open loop gain = 80dB

• Differential gain = 0.05%

• Differential phase = 0.05°

• Pb-free plus anneal available (RoHS compliant)

Applications

• Video amplifiers

• PCMCIA applications

• A/D drivers

• Line drivers

• Portable computers

• High speed communications

• RGB printers, FAX, scanners

• Broadcast equipment

• Active filtering

FN7061 Rev 3.00

May 19, 2006

Page 1 of 15

Share Link: