OPF522 查看數據表（PDF） - TT Electronics.
零件编号
产品描述 (功能)
生产厂家
OPF522 Datasheet PDF : 9 Pages
| |||
Fiber Optic Receiver
OPF520 Series
Electrical Specifications
Absolute Maximum Ratings (TA = 25° C unless otherwise noted)
Storage Temperature
Opera ng Temperature
Lead Soldering Temperature (for 10 seconds)
Supply Voltage
Output Current
Output Voltage
Open Collector Power Distribu on
Fan Out (TTL)
55° C to +115° C
-40° C to +85° C
260° C
-0.5 V to +7.0 V
25 mA
-0.5 V to +18.0 V
40mW
5 (1)
Electrical Characteristics (TA = 25° C unless otherwise noted)
SYMBOL
PARAMETER
MIN TYP MAX UNITS
TEST CONDITIONS
IOH High Level Output Current
5 250 µA VO = 18V, POC < -40 dBm, See Note 2
VOL Low Level Output Voltage
0.2 0.5 V IO = 8 mA, POC > +24 dBm, See Note2
ICCH Supply Current, Output High
3.5 6.3 mA VCC = 5.25 V, POC < -40 dBm, See Note 2
ICCL Supply Current, Output Low
6.9 10 mA VCC = 5.25 V, POC < -24 dBm, See Note 2
Peak Input Power Level, Output High
POC(H)
(Guaranteed Output High)
-40 dBm
λp = 850 nm
0.1 µW
Peak Input Power Level, Output Low
POC(L)
(Guaranteed Output Low)
-25.4
2.9
-24
4.0
-9.2 dBm
λp = 850 nm, IO = 8 mA
120 µW
-10 dBm λp = 850 nm, IO = 8 mA
100 µW -40ºC ≤ TA ≤ +85ºC
tr, tf Rise, Fall Time
30
ns
tPDHL Propaga on Delay, Output High to Low
65
tPDLH Propaga on Delay, Output Low to High
100
ns
POC = 20 dBm (peak), ƒ = 2.5 MHz, See Note 3
ns
PWD Pulse Width Distor on
±30
%
Notes:
1. 8mA load (5 x 1.6 mA), RL = 560 Ω
2. Use recommended test circuit below, but connect VO to an independent voltage source with RL = 0.
3. Use recommended test circuit below.
General Note
TT Electronics reserves the right to make changes in product specification without
notice or liability. All information is subject to TT Electronics’ own data and is
considered accurate at time of going to print.
© TT electronics plc
OPTEK Technology, Inc.
1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200
www.optekinc.com | www.ttelectronics.com
Issue D 08/2016 Page 4
Share Link: 