IL2411D 查看數據表（PDF） - IK Semicon Co., Ltd
零件编号
产品描述 (功能)
生产厂家
IL2411D Datasheet PDF : 6 Pages
| |||
IL2411
PIN DESCRIPTION
Name
Pin
VCC
1
RSL
2
LFI
3
LF0
4
GND
5
HF0
6
HFI
7
Out
8
Description
Positive power supply.
External resistor
Input low frequency oscillator
Output low frequency oscillator
Negative power supply
High frequency oscillator output
High frequency oscillator input
Tone output
MAXIMUM RATINGS*
Symbol
Parameter
Value
Unit
VCC DC Supply Voltage (Referenced to GND)
to +30.0
V
PD Power Dissipation in Still Air, Plastic DIP
400
mW
Tstg
Storage Temperature
-65 to +150
C
* Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device.
These are stress ratings only and functional operation of the device at these or any other conditions beyond those
indicated under “recommended operating conditions” is not implied.
Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
RECOMMENDED OPERATING CONDITIONS
Symbol
VCC
TA
Parameter
DC Supply Voltage (Referenced to GND)
Operating Temperature
Min
Max
Unit
13.0
29.0
V
-45
+65
C
This device contains protection circuitry to guard against damage due to high static voltages or electric fields.
However, precautions must be taken to avoid applications of any voltage higher than maximum rated voltages to this
high-impedance circuit. For proper operation, VIN and VOUT should be constrained to the range GND(VIN or
VOUT)VCC.
Unused inputs must always be tied to an appropriate logic voltage level (e.g., either GND or VCC). Unused
outputs must be left open.
2011, March, Rev. 01
Share Link: 