Low-Power, 622Mbps Limiting Amplifiers
with Chatter-Free Power Detect for LANs
____________________________Typical Operating Characteristics (continued)
(MAX3761/MAX3762 EV kit, VCC = +5.0V, PECL outputs terminated with 50Ω to VCC - 2V, input is a 1-0 pattern, 622Mbps, TA = +25°C,
unless otherwise noted.)
DATA OUTPUT SINGLE-ENDED
(223-1 PRBS PATTERN)
INPUT = 2Vp-p
TA = +85°C
50mV/
div
200mV/
div
RANDOM JITTER
DIFFERENTIAL OUTPUT
(OUT+ - OUT-)
INPUT = 16mVp-p
TA = +27°C
1-0 PATTERN 622Mbps
RANDOM JITTER vs.
POWER-SUPPLY NOISE FREQUENCY
10
DIFFERENTIAL OUTPUT RANDOM JITTER
DATA INPUT AMPLITUDE = 16mVp-p
INPUT AMPLITUDE
8 POWER SUPPLY = 100mVp-p
6
4
500ps/div
200ps/div
2
103
104
105
106
FREQUENCY ON POWER SUPPLY (Hz)
______________________________________________________________Pin Description
PIN
1
2
3
4, 17
5
6
7
8
9
10
11
12
13
14
15
16
18
19
20
NAME
FILTER
RSSI
EN
VCC
VIN+
VIN-
GND
SUB
CZP
CZN
INV
VTH
GNDO
OUT-
OUT+
VCCO
LOS-
LOS+
DISABLE
FUNCTION
Sets the integration frequency of the power detector. Impedance at this node is approximately 500Ω.
Received-Signal-Strength Indicator. An analog DC voltage representing the input power.
Connect to VCC.
+5V Power Supply
Positive Input Data
Negative Input Data
Supply Ground
Substrate. Connect to ground.
Sets input offset correction, low-frequency cutoff.
Sets input offset correction, low-frequency cutoff.
Negative Input to Op Amp. Used for programming the loss-of-signal threshold.
Loss-of-Signal Threshold Voltage
Ground Power Supply for Output Buffers
Negative PECL Data Output
Positive PECL Data Output
+5V Power Supply for Output Buffers
Negative Loss-of-Power Flag, TTL (MAX3761) or PECL (MAX3762)
Positive Loss-of-Power Flag, TTL (MAX3761) or PECL (MAX3762)
Disables the data outputs when high. TTL (MAX3761) or PECL (MAX3762).
_______________________________________________________________________________________ 5