NES2427P-45
RECOMMENDED MOUNTING CONDITIONS FOR CORRECT USE
(1) Fix to heat sink or mount surface completely with screws at the four holes of the flange.
(2) The recommended torque strength of the screws is 30 N typical using M2.3 type screws.
(3) The recommended flatness of the mount surface is less than ±10 µm (roughness of surface is ∇∇∇).
RECOMMENDED SOLDERING CONDITIONS
This product should be soldered and mounted under the following recommended conditions. For soldering
methods and conditions other than those recommended below, contact your NEC sales representative.
Soldering Method
Partial Heating
Soldering Conditions
Pin temperature: 260 °C or below,
Time: 5 seconds or less (per pin row)
Recommended Condition Symbol
−
For details of recommended soldering conditions, please contact your local NEC sales office.
6
Preliminary Data Sheet P14810EJ1V0DS00