NIS5135 查看數據表（PDF） - Diodes Incorporated.
零件编号
产品描述 (功能)
生产厂家
NIS5135 Datasheet PDF : 13 Pages
| |||
NOT RECOMMENDED FOR NEW DESIGN
NO ALTERNATE PART
NIS5135
Pin Descriptions
Pin Number
1 to 5
6
7
8
9
10
Exposed PAD
Pin Name
Source
NC
ILIMIT
Enable/Fault
dv/dt
GND
VDD
Function
The internal NMOS power device’s Source pins:
These pins are the Source of internal power device and also the output terminal of the electronic
fuse.
No internal connection to device Internal NMOS power device turn-on time adjustment pin:
If this pin is left unconnected, the internal capacitor ensures the turn-on ramp is over a period of
2ms typical. If an additional delay is required, connect a capacitor from this pin to the ground.
Current limit setting pin:
A resistor between Source pins and this pin sets the overload and short-circuit current limit
thresholds.
Tri-state bi-directional interface pin:
The output can be disabled by pulling this pin to ground through an open drain or an open
collector. Additionally, this pin output goes to an intermediate state to indicate that the device is in
thermal shutdown state. This pin can also be connected together with other NIS5135 devices to
cause a system-wide simultaneous shutdown during thermal events.
Internal NMOS power device turn-on time adjustment pin:
If this pin is is left unconnected, the internal capacitor ensures the turn-on ramp is over a period of
2ms typical. If an additional delay is required, connect a capacitor from this pin to the ground.
Ground pin
Positive input voltage to the device
NIS5135
Document number: DS37968 Rev. 4 - 3
3 of 13
www.diodes.com
May 2017
© Diodes Incorporated
Share Link: 