NOIL2SM1300A 查看數據表（PDF） - ON Semiconductor

零件编号

产品描述 (功能)

生产厂家

NOIL2SM1300A

LUPA1300-2: High Speed CMOS Image Sensor

ON Semiconductor 

NOIL2SM1300A

LUPA1300-2: High Speed

CMOS Image Sensor

Features

• 1280 x 1024 Active Pixels

• 14 mm X 14 mm Square Pixels

• 1.4” Optical Format

• Monochrome or Color Digital Output

• 500 fps Frame Rate

• On-Chip 10-Bit ADCs

• 12 LVDS Serial Outputs

• Random Programmable ROI Readout

• Pipelined and Triggered Global Shutter

• On-Chip Column FPN Correction

• Serial Peripheral Interface (SPI)

• Limited Supplies: Nominal 2.5 V and 3.3 V

• −50°C to +85°C Operational Temperature Range

• 168-Pin mPGA Package

• Power Dissipation: 1350 mW

• These Devices are Pb−Free and are RoHS Compliant

Applications

• High Speed Machine Vision

• Motion Analysis

• Intelligent Traffic System

• Medical Imaging

• Industrial Imaging

Description

The LUPA1300-2 is an integrated SXGA high speed, high

sensitivity CMOS image sensor. This sensor targets high

speed machine vision and industrial monitoring

applications. The LUPA1300-2 sensor runs at 500 fps and

has triggered and pipelined shutter modes. It packs 24

parallel 10-bit A/D converters with an aggregate conversion

rate of 740 MSPS. On-chip digital column FPN correction

enables the sensor to output ready to use image data for most

applications. To enable simple and reliable system

integration, the 12 channels, 1 sync channel, 8 Gbps, and

LVDS serial link protocol supports skew correction and

serial link integrity monitoring.

The peak responsivity of the 14 mm x 14 mm 6T pixel is

63 DN/nJ/cm2. Dynamic range is measured at 57 dB. In full

frame video mode, the sensor consumes 1350 mW from the

2.5 V and 3.3 V power supplies. The sensors integrate A/D

www.onsemi.com

Figure 1. LUPA1300−2 Die Photo

conversion, on-chip timing for a wide range of operating

modes, and has an LVDS interface for easy system

integration.

By removing the visually disturbing column patterned

noise, this sensor enables building a camera without any

offline correction or the need for memory. In addition, the

on-chip column FPN correction is more reliable than an

offline correction, because it compensates for supply and

temperature variations. The sensor requires one master

clock for operations up to 500 fps.

The LUPA1300-2 is housed in a 168 pin mPGA package

and is available in a monochrome version and Bayer (RGB)

patterned color filter array. The monochrome version is also

available without glass. Contact your local

ON Semiconductor office.

© Semiconductor Components Industries, LLC, 2015

1

July, 2015 − Rev. 11

Publication Order Number:

NOIL2SM1300A/D

Share Link: