PA-120P-27P 查看數據表（PDF） - Mean Well Enterprises Co., Ltd.

零件编号

产品描述 (功能)

生产厂家

PA-120P-27P

120W Single Output Power Supply or Battery Charger

Mean Well Enterprises Co., Ltd. 

PA / P B - 1 2 0 120W Single Output Power Supply or Battery Charger

series

■ Features :

‧AC input range selected by switch

‧Built-in passive PFC function compliance to EN61000-3-2

‧With AC ON-OFF switch

‧3 poles AC inlet with fuse holder

‧Protections: Short circuit / Overload / Over voltage / Over temperature

‧Charger type can be selected (Optional)

‧Charger for lead-acid batteries

‧2 color LED loading indicator

‧Open frame models available (Without safety approval)

‧Low cost, High reliability

‧2 years warranty

S:Power Supply

P A 120 P 13 C

A:Voltage detector

B:Current detector

P:With PFC

N:None PFC

□:O.D.M. number

P:Open P.C.B.

C:With case

13:13.8V

27:27.6V

54:55.2V

SPECIFICATION

MODEL

PA/PB-120□-13□

PA/PB-120□-27□

PA/PB-120□-54□

OUTPUT

DC VOLTAGE

RATED CURRENT

CURRENT RANGE

RATED POWER

LED INDICATED

13.8V

27.6V

7.2A

4.3A

0 ~ 7.2A

0 ~ 4.3A

99.36W

118.68W

PA series voltage 105%±1%↓: RED / 105%±1%↑:GREEN

PB series load 46%±10%↓: GREEN / 46%±10%↑:RED

55.2V

2.2A

0 ~ 2.2A

121.44W

VOLTAGE RANGE

88 ~ 132VAC / 176 ~ 264VAC selected by switch 248 ~ 370VDC

FREQUENCY RANGE

47 ~ 63Hz

POWER FACTOR (Typ.)

>0.65 (with PFC series)

INPUT EFFICIENCY (Typ.)

73%

79%

79%

AC CURRENT (Typ.)

3A/115VAC 1.5A/230VAC

INRUSH CURRENT (Typ.) COLD START 25A/115VAC 50A/230VAC

LEAKAGE CURRENT

OVERLOAD

<1.5mA / 240VAC

90 ~ 110% rated output power

Protection type : Constant current limiting, recovers automatically after fault condition is removed

PROTECTION OVER VOLTAGE

OVER TEMPERATURE

15 ~ 17V

30 ~ 35V

60 ~ 66V

Protection type : Hiccup mode, recovers automatically after fault condition is removed

RTH2≧70℃ ±10℃ detect on RTH2 thermistor

Protection type : Shut down o/p voltage, recovers automatically after temperature goes down

WORKING TEMP.

-10 ~ +45℃ (Refer to "Derating Curve")

WORKING HUMIDITY

20 ~ 90% RH non-condensing

ENVIRONMENT STORAGE TEMP., HUMIDITY -20 ~ +85℃, 10 ~ 95% RH

TEMP. COEFFICIENT

±0.05%/℃ (0 ~ 45℃)

VIBRATION

10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes

SAFETY STANDARDS

UL60950-1, TUV EN60950-1, EN60335, EN60335-1, EN60335-2-29 approved

SAFETY & WITHSTAND VOLTAGE

EMC

(Note 4)

ISOLATION RESISTANCE

EMC EMISSION

I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC

I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH

Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3

EMC IMMUNITY

Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level, criteria A

MTBF

149.6K hrs min. MIL-HDBK-217F (25℃)

OTHERS DIMENSION

PCB Type:144*90*33mm External case type:180*96*49mm (L*W*H)

PACKING

1.1Kg; 16pcs / 17.9Kg / 1.47CUFT(without PFC) 1.24Kg; 16pcs / 20.1Kg / 1.47CUFT(with PFC)

NOTE

1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.

2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

3. Tolerance : includes set up tolerance, line regulation and load regulation.

4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets

EMC directives.

5. With PFC I/P range: 95~132VAC/190~264VAC.

6. For open P.C.B. WITH 17.8CFM min. Forced air.

File Name:PA,PB-120-SPEC 2015-03-12

Share Link: