SFSD8192N1BW1MT-I-QG-111-STD 查看數據表（PDF） - Unspecified
零件编号
产品描述 (功能)
生产厂家
SFSD8192N1BW1MT-I-QG-111-STD Datasheet PDF : 23 Pages
| |||
S-300u Series
MICRO SD Memory Card
1 Feature summary
Highly-integrated memory controller
o Fully compliant with SD Memory Card specification SD1.01, SD1.1, SD2.0
and SD3.01 and MICRO SD Memory Card Addendum 4.00
Standard MICRO SD Memory Card form factor
o 15.0mm x 11.0mm x 0.7mm
Operating voltage 2.7…3.6V
Low-power CMOS technology
High reliability
o MTBF:
> 3,000,000 hours
o Number of insertions: > 10,000
o Extended Temperature range -25° up to 85°C
o Industrial Temperature range -40° up to 85°C
Hot swappable
High performance
o Speed class
2GB Card
speed class 6
1,GB, 4GB, 8GB speed class 10
o SD burst up to 25MB/s
o SD Low/High speed 0…25/50MHz clock rate
o Flash burst up to 40MB/s
o Flash Bus interleave
Operating bus modes: SD 1 & 4bit and SPI
Error Correction up to 24bit/1KB BCH ECC
Wear Leveling: equal wear leveling of static and dynamic data
The wear leveling assures that dynamic data as well as static data is balanced evenly across the memory.
With that the maximum write endurance of the device is guaranteed.
Write Endurance: Due to advanced wear leveling an even use of the entire flash is guaranteed, regardless
how much “static” (OS) data is stored. Example: If the average file size is 10MByte and the total capacity is
8GByte, 48Mio write cycles can be performed.
Available densities
o 1, 2, 4, and 8GBytes (SLC NAND Flash)
Controlled BOM
Life Cycle Management
Swissbit AG
Industriestrasse 4
CH-9552 Bronschhofen
Switzerland
Swissbit reserves the right to change products or specifications without notice.
Revision: 1.10
www.swissbit.com
industrial@swissbit.com
S-300u_data_sheet_SD-NxBW_Rev110
Page 23 of 23
Share Link: 