HI5860 查看數據表（PDF） - Renesas Electronics
零件编号
产品描述 (功能)
生产厂家
HI5860 Datasheet PDF : 12 Pages
| |||
HI5860
Electrical Specifications
PARAMETER
AVDD = DVDD = +5V (except where otherwise noted), VREF = Internal 1.2V, IOUTFS = 20mA,
TA = -40°C to +85°C, TA = +25°C for All Typical Values. (Continued)
TEST CONDITIONS
MIN
MAX
(Note10) TYP (Note 10)
UNITS
TIMING CHARACTERISTICS
Data Set-up Time, tSU
See Figure 4 (Note 3)
Data Hold Time, tHLD
See Figure 4 (Note 3)
Propagation Delay Time, tPD
See Figure 4
CLK Pulse Width, tPW1, tPW2
See Figure 4 (Note 3)
POWER SUPPLY CHARACTERISTICS
-
1.5
-
ns
-
1.2
-
ns
-
2.5
-
ns
4
-
-
ns
AVDD Power Supply
DVDD Power Supply
Analog Supply Current (IAVDD)
(Note 9)
(Note 9)
5V or 3V, IOUTFS = 20mA
5V or 3V, IOUTFS = 2mA
2.7
5.0
5.5
V
2.7
5.0
5.5
V
-
23
-
mA
-
5
-
mA
Digital Supply Current (IDVDD)
5V (Note 5)
5V (Note 6)
-
7
-
mA
-
12
-
mA
5V (Note 7)
-
13
-
mA
3V (Note 5)
-
2.4
-
mA
3V (Note 6)
-
6
-
mA
3V (Note 7)
-
5
-
mA
Supply Current (IAVDD) Sleep Mode
Power Dissipation
5V or 3V, IOUTFS = Don’t Care
5V, IOUTFS = 20mA (Note 5)
-
2.7
-
mA
-
150
-
mW
5V, IOUTFS = 20mA (Note 6)
-
175
200
mW
5V, IOUTFS = 20mA (Note7)
-
180
-
mW
5V, IOUTFS = 2mA (Note 6)
-
80
-
mW
3V, IOUTFS = 20mA (Note 5)
-
76
-
mW
3V, IOUTFS = 20mA (Note 6)
-
87
-
mW
3V, IOUTFS = 20mA (Note7)
-
84
-
mW
3V, IOUTFS = 2mA (Note 6)
-
32
-
mW
Power Supply Rejection
Single Supply (Note 8)
-0.2
-
+0.2 % FSR/V
NOTES:
2. Gain Error measured as the error in the ratio between the full scale output current and the current through RSET (typically 625µA). Ideally the ratio
should be 32.
3. Limits should be considered typical and are not production tested.
4. Spectral measurements made with differential transformer coupled output and no external filtering.
5. Measured with the clock at 50MSPS and the output frequency at 10MHz.
6. Measured with the clock at 100MSPS and the output frequency at 40MHz.
7. Measured with the clock at 130MSPS and the output frequency at 10MHz.
8. See “Definition of Specifications” on page 8.
9. It is recommended that the output current be reduced to 12mA or less to maintain optimum performance for operation below 3V. DVDD and AVDD
do not have to be equal.
10. Parts are 100% tested at +25°C. Over-temperature limits established by characterization and are not production tested.
FN4654 Rev 7.00
February 6, 2008
Page 7 of 12
Share Link: 