DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

2N3418 查看數據表(PDF) - M/A-COM Technology Solutions, Inc.

零件编号
产品描述 (功能)
生产厂家
2N3418
MA-COM
M/A-COM Technology Solutions, Inc. MA-COM
2N3418 Datasheet PDF : 4 Pages
1 2 3 4
2N3418(S) - 2N3421(S) Series
NPN Medium Power Silicon Transistor
Rev. V1
Outline Drawing (TO-5 & TO-39)
Dimensions
LTR
Inches
Millimeters
Note
MIN
MAX
MIN
MAX
CD
0.305 0.335
7.75
8.51
CH
0.240 0.260
6.10
6.60
HD
0.335 0.370
8.51
9.40
LC
0.200 TP
5.08 TP
7
LD
0.016 0.019 0.041 0.048
8, 9
LL
0.500 0.750
12.7
19.05
LU
0.016 0.019 0.041 0.048
8, 9
L1
0.050
1.27
8, 9
L2
0.250
6.35
8, 9
P
0.100
2.54
7
Q
0.030
0.76
5
TL
0.029 0.045
0.74
1.14
TW
0.028 0.034
0.71
0.86
r
0.010
0.25
10
a
45° TP
45° TP
7
1, 2, 10, 12, 13, 14
1. Dimensions are in inches.
2. Millimeters are given for general information only.
3. Beyond r (radius) maximum, TW shall be held for a minimum length of .011 (0.28 mm).
4. Dimension TL measured from maximum HD.
5. Body contour optional within zone defined by HD, CD, and Q.
6. CD shall not vary more than .010 inch (0.25 mm) in zone P. This zone is controlled for automatic handling.
7. Leads at gauge plane .054 +.001 -.000 inch (1.37 +0.03 -0.00 mm) below seating plane shall be within 0.007 inch (0.18 mm) radius of
true position (TP) at maximum material condition (MMC) relative to tab at MMC. The device may be measured by direct methods or by
gauging procedure.
8. Dimension LU applies between L, and L,. Dimension LD applies between L, and LL minimum. Diameter is uncontrolled in and beyond LL
minimum.
9. All three leads.
10. The collector shall be internally connected to the case.
11. Dimension r (radius) applies to both inside corners of tab.
12. In accordance with ASME Y14.5M, diameters are equivalent to Фx symbology.
13. Lead 1 = emitter, lead 2 = base, lead 3 = collector.
14. For non-S-suffix devices (T0-5), dimension LL = 1.5 inches (38.10 mm) min. and 1.75 inches (44.45 mm) max. For S-suffix types (T0-39),
dimension LL = 0.5 inch (12.70 mm) min. and 750 inch (19.05 mm) max.
3
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]