MAS9160(2000) 查看數據表（PDF） - Micro Analog Systems Oy
零件编号
产品描述 (功能)
生产厂家
MAS9160 Datasheet PDF : 8 Pages
| |||
APPLICATION INFORMATION
DA9160.000
26 October, 2000
VIN VIN
VOLTAGE
REFERENCE 160kΩ
+
CTRL1
OVER CURRENT
PROTECTION
OVER TEMPERATURE
PROTECTION
+
CTRL2
OVER CURRENT
PROTECTION
BYPASS
CBYPASS
VOUT1
VOUT2
GND
CL
CL
CIN
Parameter
Symbol Min Max Unit
Note
Output
Capacitance
CL
0.22
µF Ceramic and film capacitors can be
used.
Effective Series Resistance
ESR
0.05 3
Ohm When within this range, stable with
Bypass Capacitance
CBYPASS
Typically
0.01
all IOUT = 0 mA…150 mA values
µF Ceramic and film capacitors are
best suited. For maximum output
voltage accuracy DC leakage
current through capacitor should be
kept as low as possible. In any case
DC leakage current must be below
100 nA.
Input Capacitance
CIN
1
µF Ceramic, tantalum, and film
capacitors can be used. If using a
tantalum capacitor, it should be
checked that the surge current
rating is sufficient for the
application.
Values given on the table are minimum requirements unless otherwise specified. When selecting capacitors,
tolerance and temperature coefficient must be considered to make sure that the requirement is met in all
potential operating conditions.
Page 6 (8)
Share Link: 