DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

MAS9123 查看數據表(PDF) - Micro Analog systems

零件编号
产品描述 (功能)
生产厂家
MAS9123
MAS
Micro Analog systems MAS
MAS9123 Datasheet PDF : 12 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
DA9123.007
3 May 2004
MAS9123
80 mA LDO Voltage Regulator IC
Very Low Noise: 9.5 µVrms
Very Short Start-up Time: 20 µs
Excellent Ripple Rejection: 68 dB
Stable with Low-ESR Output
Capacitors
Low Minimum Output Capacitance
Requirement: 0.23 µF
Regulator Enable/Disable Control
DESCRIPTION
MAS9123 is a low dropout voltage regulator with an
enable/disable pin, which allows device to be
turned off or on by pulling control to low or high.
Due to the very low noise level of only 9.5 µVrms
MAS9123 is highly suitable for very sensitive
circuits, e.g., in portable applications. In addition to
the noise level, MAS9123 excels in dropout voltage
(95 mV typical at 50 mA) and in start-up time (with
bypass capacitor typically 20 µs from start-up to
within ±1% of VOUT(NOM)). Also its ripple rejection
ability of 68 dB at 10 kHz exceed that of
competition.
The Equivalent Series Resistance (ESR) range of
output capacitors that can be used with MAS9123
is very wide. This ESR range from a few mup to a
couple of Ohms combined with no minimum output
FEATURES
Optimized for Fast Start-up
Very Low Noise
Internal Thermal Shutdown
Short Circuit Protection
Functionally and Pin Compatible with
LP2982/LP2985/LP3985
Small SOT23-5 or tiny WL-CSP Package
Output Voltage Options: 2.8, 3.0 and 3.3 V,
see Ordering Information p. 12
current requirement makes the usage of MAS9123
easier and low in cost. Also the minimum output
capacitance requirement is very low. This
combined with very short start-up time makes it
possible to switch the regulator off and on even in
timing critical and/or noise sensitive applications.
MAS9123 also includes an auto-discharge function,
wherein a shutdown transistor turns on and
discharges the output capacitor, when MAS9123 is
turned off.
An internal thermal protection circuit prevents the
device from overheating. Also the maximum output
current is internally limited. In order to save power
the device goes into sleep mode when the regulator
is disabled.
APPLICATIONS
RF Oscillators
GPS Systems
RF Section of Wireless Systems
RF Section of Cellular Phones
Oven Oscillators
RF Section of Cordless Phones
Battery Powered Systems
Portable Systems
Radio Control Systems
1 (12)

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]