HSP43220 查看數據表（PDF） - Renesas Electronics

零件编号

产品描述 (功能)

生产厂家

HSP43220

Decimating Digital Filter

Renesas Electronics 

HSP43220

DDF Control Registers (Continued)

H_Register 1 (A1 = 1, A0 = 0)

RESERVED

15 14 13

F_DIS

FD0

12

F_CLA H_BYP

H_DRATE

FC0

HB0 R9 R8 R7 R6 R5 R4 R3 R2 R1 R0

11

10

9876543210

H_DRATE Bits

R0-R9 are used to select the amount of decimation in the HDF. The amount of

decimation selected is programmed as the required decimation minus one; for

instance to select decimation of 1024 H_DRATE is set equal to 1023. HDRATE +1 is

defined as HDEC.

H_BYP

Bit HB0 is used to select HDF bypass mode. This mode is selected by setting

H_BYP = 1. When this mode is selected the input data passes through the HDF

unfiltered. Internally H_STAGES and H_DRATE are both set to zero and H_GROWTH

is set to 50. H_REGISTER 2 must be reloaded when H_BYP is returned to 0. To disable

HDF bypass mode H_BYP = 0. The relationship between CK_IN and FIR_CK in this

and all other modes is defined by Equation 2.

F_CLA

Bit FC0 is used to select the clear accumulator mode in the FIR. This mode is enabled

by setting F_CLA = 1 and is disabled by setting F_CLA = 0. In normal operation this bit

should be set equal to zero. This mode zeros the feedback path in the accumulator of

the multiplier/accumulator (MAC). It also allows the multiplier output to be clocked off

the chip by FIR_CK, thus DATA_RDY has no meaning in this mode. This mode can be

used in conjunction with the F_OAD bit to read out the FIR coefficients from the

coefficient RAM.

F_DIS

Bit FD0 is used to select the FIR disable mode. This feature enables the FIR parameters

to be changed. This feature is selected by setting F_DIS = 1. This mode terminates the

current FIR cycle. While this feature is selected, the HDF continues to process data and

write it into the FIR data RAM. When the FIR re-programming is completed, the FIR can

be re-enabled either by clearing F_DIS, or by asserting one of the start inputs, which

automatically clears F_DIS.

FIGURE 6.

FN2486 Rev 10.00

Oct 10, 2008

Page 8 of 21

Share Link: