HSP43220/883 查看數據表（PDF） - Intersil
零件编号
产品描述 (功能)
生产厂家
HSP43220/883 Datasheet PDF : 7 Pages
| |||
HSP43220/883
Absolute Maximum Ratings
Supply Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8V
Input, Output Voltage . . . . . . . . . . . . . . . . . . . GND -5V to VCC 0.5V
ESD Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Class 1
Operating Conditions
Voltage Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +4.5V to 5.5V
Temperature Range. . . . . . . . . . . . . . . . . . . . . . . . . -55oC to 125oC
Thermal Information
Thermal Resistance (Typical, Note 1)
θJA (oC/W) θJC (oC/W)
PGA Package. . . . . . . . . . . . . . . . . . . .
35
5
Maximum Package Power Dissipation at 125oC
PGA Package. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.52
Maximum Junction Temperature . . . . . . . . . . . . . . . . . . . . . . 175oC
Maximum Storage Temperature Range . . . . . . . . . -65oC to 150oC
Maximum Lead Temperature (Soldering 10s) . . . . . . . . . . . . . 300oC
Die Characteristics
Number of Gates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48,250
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the
device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
NOTE:
1. θJA is measured with the component mounted on an evaluation PC board in free air.
TABLE 1. DC ELECTRICAL PERFORMANCE SPECIFICATIONS
Devices Guaranteed and 100% Tested
PARAMETER
SYMBOL
TEST
CONDITIONS
GROUP A
SUB-
GROUPS
TEMP (oC)
Logical One Input Voltage
Logical Zero Input Voltage
Output HIGH Voltage
Output LOW Voltage
Input Leakage Current
Output Leakage Current
Clock Input High
Clock Input Low
Standby Power Supply Current
VIH
VIL
VOH
VOL
II
IO
VIHC
VILC
ICCSB
VCC = 5.5V
VCC - 4.5V
IOH = 400µA,
VCC = 4.5V (Note 2)
IOL = 2.0mA
VCC = 4.5V (Note 2)
VIN = VCC or GND,
VCC = 5.5V
VOUT = VCC or GND,
VCC = 5.5V
VCC = 5.5V
VCC = 4.5V
VIN = VCC or GND,
VCC = 5.5V,
Outputs Open
1, 2, 3
1, 2, 3
1, 2, 3
1, 2, 3
1, 2, 3
1, 2, 3
1, 2, 3
1, 2, 3
1, 2, 3
-55 ≤ TA ≤ 125
-55 ≤ TA ≤ 125
-55 ≤ TA ≤ 125
-55 ≤ TA ≤ 125
-55 ≤ TA ≤ 125
-55 ≤ TA ≤ 125
-55 ≤ TA ≤ 125
-55 ≤ TA ≤ 125
-55 ≤ TA ≤ 125
Operating Power Supply Current
ICCOP f = 15.0MHz,
VCC = 5.5V (Note 3)
1, 2, 3
-55 ≤ TA ≤ 125
Functional Test
FT
(Note 4)
7, 8
-55 ≤ TA ≤ 125
NOTES:
2. Interchanging of force and sense conditions is permitted.
3. Operating supply current is proportional to frequency, typical rating is 8mA/MHz.
4. Tested as follows: f = 1MHz, VIH = 2.6, VIL = 0.4, VOH ≥ 1.5V, VOL ≤ 1.5V, VIHC = 3.4V and VILC = 0.4V.
LIMITS
MIN TYP UNITS
2.2
-
V
-
0.8
V
2.6
-
V
-
0.4
V
-10 +10
µA
-10 +10
µA
3.0
-
V
-
0.8
V
-
500
µA
-
120
mA
-
-
2
Share Link: 