HSP43220/883 查看數據表（PDF） - Intersil
零件编号
产品描述 (功能)
生产厂家
HSP43220/883 Datasheet PDF : 7 Pages
| |||
HSP43220/883
BURN-IN CIRCUIT SIGNALS (CONTINUED)
PIN LEAD PIN NAME
BURN-IN
SIGNAL
PIN LEAD
PIN NAME
BURN-IN
SIGNAL
B6
DATA_IN 13
F6
B7
DATA_IN 12
F5
E11
DATA_OUT 7
VCC/2
F1
C_BUS 10
F3
B8
DATA_IN 15
F8
F2
C_BUS 15
F8
B9
CK_IN
F0
F3
C_BUS 14
F7
B10
VCC
VCC
B11
DAT_OUT 1
VCC/2
K5
OUT_ENP
F9
K6
VCC
VCC
K7
GND
GND
F9
DATA_OUT9
VCC/2
F10
VCC
VCC
K11
DATA_OUT 15
VCC/2
L1
C_BUS 6
F7
L2
C_BUS 3
F4
K8
DATA_OUT 22
VCC/2
L3
C_BUS 2
F3
K9
DATA_OUT 19
VCC/2
L4
C_BUS 0
F1
K10
DATA_OUT 17
VCC/2
L5
OUT_ENX
F9
NOTES:
10. VCC/2 (2.7 ±10%) used for outputs only.
11. 47kΩ (±20%) resistor connected to all pins except VCC and GND.
12. VCC = 5.5 ±0.5V.
13. 0.1µF (minimum) capacitor between VCC and GND per position.
14. F0 = 100kHz ±10%, F1 = F0/2, F2 = F1/2....F16 = F15/2, 40% - 60% duty cycle.
15. Input voltage limits: VIL = 0.8 maximum, VIH = 4.5V ±10%.
PIN LEAD
J10
J11
K1
K2
K3
K4
L6
L7
L8
L9
L10
L11
PIN NAME
DATA_OUT 16
DATA_OUT 14
C_BUS 8
C_BUS 5
C_BUS 4
C_BUS 1
DATA_RDY
VCC
DATA_OUT 23
DATA_OUT 21
DATA_OUT 20
DATA_OUT 18
BURN-IN
SIGNAL
VCC/2
VCC/2
F1
F6
F5
F2
VCC/2
VCC
VCC/2
VCC/2
VCC/2
VCC/2
Metal Topology
DIE DIMENSIONS:
348 x 349.2 x 19 ±1 mils
METALLIZATION:
Type: Si - Al, or Si - Al - Cu
Thickness: 8kÅ
WORST CASE CURRENT DENSITY:
1.18 x 105A/cm2
GLASSIVATION:
Type: Nitrox
Thickness: 10kÅ
All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9000 quality systems.
Intersil Corporation’s quality certifications can be viewed at www.intersil.com/design/quality
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without
notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and
reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result
from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com
6
Share Link: 