MAC4DHMT4 查看數據表（PDF） - Littelfuse, Inc
零件编号
产品描述 (功能)
生产厂家
MAC4DHMT4 Datasheet PDF : 7 Pages
| |||
Thyristors
Surface Mount – 600V > MAC4DHM
Maximum Ratings (TJ = 25°C unless otherwise noted)
Rating
Symbol
Value
Unit
Peak Repetitive Off-State Voltage (Note 1)
(Gate Open, Sine Wave 50 to 60 Hz, TJ = -40° to 110°C)
On-State RMS Current (Full Cycle Sine Wave, 60 Hz, TC = 93°C)
Peak Non-Repetitive Surge Current
(One Full Cycle Sine Wave, 60 Hz, TC= 110°C)
Circuit Fusing Consideration (t = 8.3 msec)
VDRM,
VRRM
IT (RMS)
ITSM
I2t
600
4.0
40
6.6
V
A
A
A²sec
Peak Gate Current (Pulse Width ≤ 20 µsec, TC= 108°C)
IGM
4.0
A
Peak Gate Power (Pulse Width ≤ 10 µsec, TC= 108°C)
PGM
2.0
W
Peak Gate Voltage (Pulse Width ≤ 20 µsec, CT= 93°C)
VGM
5.0
V
Average Gate Power (t = 8.3 msec, TC= 108°C)
PG(AV)
1.0
W
Operating Junction Temperature Range
TJ
-40 to +110
°C
Storage Temperature Range
Tstg
-40 to +150
°C
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied.
Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.
1. VDRM and VRRM for all types can be applied on a continuous basis. Ratings apply for zero or negative gate voltage; however, positive gate voltage shall not be applied concurrent with negative
potential on the anode. Blocking voltages shall not be tested with a constant current source such that the voltage ratings of the devices are exceeded.
Thermal Characteristics
Rating
Symbol
Value
Unit
Thermal Resistance,
Junction−to−Case (AC)
RƟJC
3.5
Junction−to−Ambient
RƟJA
88
Junction−to−Ambient (Note 2)
RƟJA
80
Maximum Lead Temperature for Soldering Purposes, 1/8” from case for
10 seconds
TL
260
2. These ratings are applicable when surface mounted on the minimum pad sizes recommended.
3. 1/8" from case for 10 seconds.
Electrical Characteristics - OFF (TJ = 25°C unless otherwise noted ; Electricals apply in both directions)
Peak Repetitive Blocking Current
(VD = VDRM = VRRM; Gate Open)
Characteristic
TJ = 25°C
TJ = 110°C
Symbol
Min
Typ
Max
IDRM,
-
IRRM
-
-
0.01
-
2.0
°C/W
°C
Unit
mA
Electrical Characteristics - ON (TJ = 25°C unless otherwise noted; Electricals apply in both directions)
Characteristic
Symbol
Min
Typ
Peak On−State Voltage (Note 4) (ITM = ±6.0 A)
Gate Trigger Current
(Continuous dc)
(VD = 12 V, RL = 100 Ω)
VTM
MT2(+), G(+)
MT2(+), G(−)
MT2(−), G(−)
IGT
MT2(–), G(+)
Holding Current (VD = 12 V, Gate Open, Initiating Current = ±200 mA))
IH
Gate Non−Trigger Voltage (Continuous dc) − (VD = 12 V, RL = 100 Ω, TJ = 110°C)
All Four Quadrants
VGD
(VD = 12 V, IG = 5.0 mA) MT2(+), G(+)
Latching Current
(VD = 12 V, IG = 5.0 mA)
(VD = 12 V, IG = 5.0 mA)
MT2(+), G(−)
MT2(−), G(−)
IL
(VD = 12 V, IG = 10 mA)
MT2(–), G(+)
Gate Trigger Voltage
(Continuous dc)
(VD = 12 V, RL = 100 Ω)
MT2(+), G(+)
MT2(+), G(−)
MT2(−), G(−)
VGT
MT2(–), G(+)
−
1.3
_
1.8
_
2.1
_
2.4
_
4.2
-
1.5
0.1
0.4
−
1.75
−
5.2
−
2.1
−
2.2
0.5
0.62
0.5
0.57
0.5
0.65
0.5
0.74
4. Indicates Pulse Test: Pulse Width ≤ 2.0 ms, Duty Cycle ≤ 2%.
Max
1.6
5.0
5.0
5.0
10
15
-
10
10
10
10
1.3
1.3
1.3
1.3
Unit
V
mA
mA
V
mA
V
© 2019 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 07/16/19
Share Link: 