OPL810 查看數據表（PDF） - TT Electronics.

零件编号

产品描述 (功能)

生产厂家

OPL810

Photologic Hermetic Sensors

TT Electronics. 

OPL800, OPL800-OC, OPL801, OPL801-OC, OPL810,

OPL810-OC, OPL811, OPL811-OC, OPL812-OC, OPL813-

OC, OPL820, OPL820-OC, OPL821-OC

Electrical Specifications

Absolute Maximum Ratings (TA = 25° C unless otherwise noted)

OPB800/801/810/811/812/813 and OPB800-OC Series

Output Photologic®

Voltage at Output Lead

OPL800, OPL801, OPL810, OPL811

35 V

OPL820

30 V

Duration of Output Short to VCC

Power Dissipation

OPL800, OPL801

OPL810, OPL811

OPL820

1 second

120 mW(2)

250 mW(2)

200 mW(2)

Notes:

(1) RMA flux is recommended. Duration can be extended to 10 sec. max. when flow soldering. For OPB820, a maximum of 20

grams force may be applied to leads while at soldering temperatures.

(2) Derate linearly 2.5 mW/°C above 25° C for OPL800, OPL801, OPL810, OPL811. Derate linearly 5.7 mW/°C above 90° C for

OPL820.

(3) For OPL800, OPL801, OPL810, OPL811, light measurements are made with λi = 935 nm. For OPB820, light measurements

are made with an LED source having a wavelength of 935 nm.

General Note

TT Electronics reserves the right to make changes in product specification without

notice or liability. All information is subject to TT Electronics’ own data and is

considered accurate at time of going to print.

© TT electronics plc

TT Electronics | OPTEK Technology, Inc.

1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200

sensors@ttelectronics.com | www.ttelectronics.com

Issue A 08/2016 Page 5

Share Link: