OPL810 查看數據表（PDF） - TT Electronics.
零件编号
产品描述 (功能)
生产厂家
OPL810 Datasheet PDF : 15 Pages
| |||
OPL800, OPL800-OC, OPL801, OPL801-OC, OPL810,
OPL810-OC, OPL811, OPL811-OC, OPL812-OC, OPL813-
OC, OPL820, OPL820-OC, OPL821-OC
Electrical Specifications
Electrical Characteristics (TA = 25° C unless otherwise noted)
SYMBOL
PARAMETER
MIN TYP MAX UNITS
TEST CONDITIONS
Output Rise Time, Fall Time
OPL800/801
OPL800-OC/801-OC
tr, tf
OPL810/811
OPL810-OC/811-OC/812-OC/
813-OC
- 70 -
- 70 -
- 70 -
- 100 -
ns TA = 25°C, Ee = 0 or 1 mW/cm2, RL = 8
TTL loads, f = 10 kHz, D.C. = 50%
ns TA = 25°C, Ee = 0 or 1 mW/cm2, RL =
360 Ω, f = 10 kHz, D.C. = 50%
ns TA = 25°C, Ee = 0 or 0.4 mW/cm2, RL =
10 TTL loads, f = 10 kHz, D.C. = 50%
ns TA = 25°C, Ee = 0 or 1 mW/cm2, RL =
300 Ω, f = 10 kHz, D.C. = 50%
OPL820
Propagation Delay
Low/High - High/Low
OPL800/801
tPLH, tPHL
OPL800-OC/801-OC
OPL810/811
OPL810-OC/811-OC/812-OC/
813-OC
OPL820 (to high state)
OPL820 (to low state)
- 60 -
-
5
-
-
5
-
-
5
-
-
5
-
-
1
-
- 2.1 -
ns RL = 390Ω
µs TA = 25°C, Ee = 0 or 1 mW/cm2, RL = 8
TTL loads, f = 10 kHz, D.C. = 50%
µs TA = 25°C, Ee = 0 or 1 mW/cm2, RL = 8
TTL loads, f = 10 kHz, D.C. = 50%
µs TA = 25°C, Ee = 0 or 0.4 mW/cm2, RL =
10 TTL loads, f = 10 kHz, D.C. = 50%
µs TA = 25°C, Ee = 0 or 1 mW/cm2, RL =
300 Ω, f = 10 kHz, D.C. = 50%
µs EE = 0.1 mW/cm2, RL = 390 Ω
µs EE = 01 mW/cm2, RL = 390 Ω
Data Rate Data Rate Using NRZ Format
- 100 -
kHz EE = 01 mW/cm2, RL = 390 Ω
Notes:
(1) RMA flux is recommended. Duration can be extended to 10 sec. max. when flow soldering. For OPB820, a maximum of 20
grams force may be applied to leads while at soldering temperatures.
(2) Derate linearly 2.5 mW/°C above 25° C for OPL800, OPL801, OPL810, OPL811. Derate linearly 5.7 mW/°C above 90° C for
OPL820.
(3) For OPL800, OPL801, OPL810, OPL811, light measurements are made with λi = 935 nm. For OPB820, light measurements
are made with an LED source having a wavelength of 935 nm.
(4) High output state limits are valid for 4.5 V < VCC < 16 V and Ee > 0.035 mW/cm2 (OPL820, OPL820-OC), Ee < 0.001 mW/cm2
(OPL821-OC).
(5) Low output state limits are valid for 4.5 V < VCC < 16 V and Ee > 0.035 mW/cm2 (OPL821-OC), Ee < 0.001 mW/cm2 (OPL820,
OPL820-OC).
General Note
TT Electronics reserves the right to make changes in product specification without
notice or liability. All information is subject to TT Electronics’ own data and is
considered accurate at time of going to print.
© TT electronics plc
TT Electronics | OPTEK Technology, Inc.
1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200
sensors@ttelectronics.com | www.ttelectronics.com
Issue A 08/2016 Page 9
Share Link: 