MASW-008075-000000 查看數據表（PDF） - M/A-COM Technology Solutions, Inc.
零件编号
产品描述 (功能)
生产厂家
MASW-008075-000000 Datasheet PDF : 3 Pages
| |||
MASW-008075
GaAs SPDT Switch
DC - 3.0 GHz
Rev. V1
Electrical Specifications: TA = 25°C, VC = 0 V / 3 V, Z0 = 50 Ω 4
Parameter
Test Conditions
Units Min. Typ. Max.
Insertion Loss5
Isolation
1.0 GHz
2.4 GHz
1.0 GHz
2.4 GHz
dB
—
0.3
—
dB
—
0.4
0.5
dB
—
23
—
dB
23
25
—
VSWR
0.05 - 3.0 GHz
Ratio
—
1.2:1
—
IIP2
Two Tone, +5 dBm / Tone, 5 MHz Spacing
2.4 GHz
dBm
—
80
—
IIP3
Two Tone, +5 dBm / Tone, 5 MHz Spacing
2.4 GHz
dBm
—
48
—
Input P1dB
—
dBm
—
28
—
Trise, Tfall
10% to 90% RF and 90% to 10% RF
nS
—
35
—
Ton, Toff
50% control to 90% RF, 50% control to 10% RF
nS
—
40
—
Transients
—
mV
—
10
—
Current
VC = 3.0 V
µA
—
5
10
4. For positive voltage control, external DC blocking capacitors are required on all RF ports.
5. Insertion Loss can be optimized by varying the DC blocking capacitor value, e.g. 1000 pF for 100 MHz – 1.0 GHz, 39 pF for 0.5 - 3.0 GHz.
Truth Table 6,7
Control
V1
Control
V2
RFC-RF1 RFC-RF2
0
1
On
Off
1
0
Off
On
6. Differential voltage, V (state 1) - V (state 0), must be +2.3 V
minimum and must not exceed 8.5 V.
7. 0 = 0 V ± 0.2 V, 1 = +2.5 V to 5.0 V
Lead-Free SC-70 (SOT-363)†
Handling Procedures
The following precautions should be observed to
avoid damage:
Static Sensitivity
Gallium Arsenide Integrated Circuits are sensitive
to electrostatic discharge (ESD) and can be dam-
aged by static electricity. Proper ESD control tech-
niques should be used when handling these de-
vices.
† Reference Application Note M538 for lead-free solder reflow
recommendations.
Meets JEDEC moisture sensitivity level 1 requirements.
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macomtech.com for additional data sheets and product information.
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
Share Link: 