PCA9554A(2006) 查看數據表（PDF） - NXP Semiconductors.

零件编号

产品描述 (功能)

生产厂家

PCA9554A
(Rev.:2006)

8-bit I2C-bus and SMBus I/O port with interrupt

NXP Semiconductors. 

NXP Semiconductors

PCA9554/PCA9554A

8-bit I2C-bus and SMBus I/O port with interrupt

6.1.4 Register 2 - Polarity Inversion register

This register allows the user to invert the polarity of the Input Port register data. If a bit in

this register is set (written with ‘1’), the corresponding Input Port data is inverted. If a bit in

this register is cleared (written with a ‘0’), the Input Port data polarity is retained.

Table 6. Register 2 - Polarity Inversion register bit description

Legend: * default value.

Bit Symbol Access Value Description

7

N7

R/W

0*

inverts polarity of Input Port register data

6

N6

5

N5

R/W

0*

R/W

0*

0 = Input Port register data retained (default value)

1 = Input Port register data inverted

4

N4

R/W

0*

3

N3

R/W

0*

2

N2

R/W

0*

1

N1

R/W

0*

0

N0

R/W

0*

6.1.5 Register 3 - Configuration register

This register configures the directions of the I/O pins. If a bit in this register is set, the

corresponding port pin is enabled as an input with high-impedance output driver. If a bit in

this register is cleared, the corresponding port pin is enabled as an output. At reset, the

I/Os are configured as inputs with a weak pull-up to VDD.

Table 7. Register 3 - Configuration register bit description

Legend: * default value.

Bit Symbol Access Value Description

7

C7

R/W

1*

configures the directions of the I/O pins

6

C6

R/W

1*

0 = corresponding port pin enabled as an output

5

C5

4

C4

R/W

1*

R/W

1*

1 = corresponding port pin configured as input

(default value)

3

C3

R/W

1*

2

C2

R/W

1*

1

C1

R/W

1*

0

C0

R/W

1*

6.2 Power-on reset

When power is applied to VDD, an internal Power-On Reset (POR) holds the

PCA9554/PCA9554A in a reset condition until VDD has reached VPOR. At that point, the

reset condition is released and the PCA9554/PCA9554A registers and state machine will

initialize to their default states. Thereafter, VDD must be lowered below 0.2 V to reset the

device.

For a power reset cycle, VDD must be lowered below 0.2 V and then restored to the

operating voltage.

PCA9554_9554A_7

Product data sheet

Rev. 07 — 13 November 2006

© NXP B.V. 2006. All rights reserved.

8 of 30

Share Link: