NCS2003 查看數據表（PDF） - ON Semiconductor
零件编号
产品描述 (功能)
生产厂家
NCS2003 Datasheet PDF : 17 Pages
| |||
NCS2003/A, NCV2003, NCS20032, NCV20032, NCS20034, NCV20034
ABSOLUTE MAXIMUM RATINGS
Over operating free−air temperature, unless otherwise stated
Supply Voltage (VDD − VSS)
INPUT AND OUTPUT PINS
Parameter
Symbol
Limit
Unit
VS
7.0
V
Input Voltage (Note 1)
Input Current
Output Short Current (Note 2)
TEMPERATURE
Storage Temperature
Junction Temperature
ESD RATINGS (Note 3)
VIN
IIN
IO
TSTG
TJ
VSS − 0.3 to 7.0
V
10
mA
100
mA
−65 to 150
°C
150
°C
Human Body Model
Machine Model
Charged Device Model
NCx2003, A
HBM
3000
V
NCx20032
2000
NCx20034
3000
NCx2003, A
MM
NCx20032
NCx20034
200
V
100
150
NCx2003, A
CDM
1000
V
NCx2003x
2000
OTHER PARAMETERS
Moisture Sensitivity Level (Note 5)
MSL
Level 1
Latch−up Current (Note 4)
ILU
100
mA
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
1. Neither input should exceed the range of VSS − 300 mV to 7.0 V. This device contains internal protection diodes between the input pins and
VDD. When VIN exceeds VDD, the input current should be limited to the specified value.
2. Indefinite duration; however, maximum package power dissipation limits must be observed to ensure that the maximum junction temperature
is not exceeded.
3. This device series incorporates ESD protection and is tested by the following methods:
ESD Human Body Model tested per AEC−Q100−002 and JESD22−A114
ESD Machine Model tested per AEC−Q100−003 and JESD22−A115
ESD Charged Device Model tested per AEC−Q100−011 and ANSI/ESD S5.3.1−2009
4. Latch−up current tested per JEDEC Standard JESD78.
5. Moisture Sensitivity Level tested per IPC/JEDEC standard J−STD−020A.
THERMAL INFORMATION
Thermal Metric
Symbol
Package
Single Layer Board (Note 6) Multi Layer Board (Note 7) Unit
SOT23−5/TSOP−5
408
355
SOT553−5
428
406
Junction to Ambient
Thermal Resistance
Micro8/MSOP8
qJA
SOIC−8
235
240
163
179
TSSOP−8
300
238
SOIC−14
167
123
6. Values based on a 1S standard PCB according to JEDEC51−3 with 1.0 oz copper and a 300 mm2 copper area
7. Values based on a 1S2P standard PCB according to JEDEC51−7 with 1.0 oz copper and a 100 mm2 copper area
°C/W
RECOMMENDED OPERATING CONDITIONS
Parameter
Symbol
Min
Max
Unit
Operating Supply Voltage (VDD − VSS)
Specified Operating Range
VS
NCS2003, A
TA
NCV2003, NCx20032, NCx20034
1.7
5.5
V
−40
+85
°C
−40
+125
Input Common Mode Range
VCM
VSS
VDD−0.6
V
Functional operation above the stresses listed in the Recommended Operating Ranges is not implied. Extended exposure to stresses beyond
the Recommended Operating Ranges limits may affect device reliability.
www.onsemi.com
3
Share Link: 