APU429 查看數據表（PDF） - APLUS INTEGRATED CIRCUITS

零件编号

产品描述 (功能)

生产厂家

APU429

4-Bit Micro-controller With LCD Driver

APLUS INTEGRATED CIRCUITS 

Timer

The 6-bit programmable timer can select PH3/PH9/PH15/FREQ (timer 2 can also select PH5/PH7/PH11/

PH13 by TM2X instruction) as the clock source. When it underflows, the HALT release signal is generated.

Predivider

The predivider is a 15-stage counter that uses PH0 as the clock source. The output of T-F/F is changed when

the input signal is changed from H to L. PH11~15 are reset to L when PLC 100H instruction is executed, or

power-on or external reset is used. When PH14 is changed from H to L, the HALT release signal is generated.

Alarm/frequency/melody

There is an 8-bit programmable counter and an 8-bit envelope control for alarm, frequency or melody output

from BZ/BZB.

The frequency counter can use software to select 1/2 duty, 1/3 duty or 1/4 duty drive mode.

Freq.

1/2 Duty Frequency

1/3 Duty Frequency

1/4 Duty Frequency

INT function

The INT pin can be selected by mask option as pull-high/pull-low or none, and rising edge/falling edge trigger.

Watchdog timer

The watchdog timer automatically generates a device reset when it overflows. The interval of overflow is

8/64/512 x PH10 (set by mask option). You can use software to enable and disable this function. The

watchdog enable flag will be disabled by power-on reset or reset-pin reset condition, but cannot be disabled

by watchdog reset itself.

HALT function

The HALT instruction will disable all clocks except the predivider, timer, frequency counter, PWM, EL-light

generator and chattering clock to minimize the operating current.

STOP function

The STOP instruction will disable all clocks to minimize the standby current, so only two external factors (INT,

IOA/IOC/S port, keyscan) can release the STOP condition.

Instruction Table (Total 150 instructions)

Instruction

NOP

LCT Lz, Ry

LCB Lz, Ry

LCP Lz, Ry

LCD Lz, @HL

LCT Lz, @HL

Preliminary

Machine Code

0000 0000 0000 0000

0000 001Z ZZZZ YYYY

0000 010Z ZZZZ YYYY

0000 011Z ZZZZ YYYY

0000 100Z ZZZZ 0000

0000 100Z ZZZZ Z-01

Function

No Operation

Lz Чʳ { 7SEG Чʳ Ry}

Lz Чʳ { 7SEG Чʳ Ry}

Lz Ч Ry , AC

Lz Ч T@HL

Lz {7SEG @HL

10

Flag/Remark

Ver. 0.0

Share Link: