STM817LDS6E 查看數據表（PDF） - STMicroelectronics

零件编号

产品描述 (功能)

生产厂家

STM817LDS6E

5 V supervisor with battery switchover

STMicroelectronics 

STM690A/692A/703/704/802/805/817/818/819

Operation

2.12

Battery freshness seal (STM817/818/819)

The battery freshness seal disconnects the backup battery from internal circuitry and VOUT

until it is needed. This allows an OEM to ensure that the backup battery connected to VBAT

will be fresh when the final product is put to use. To enable the freshness seal:

1. Connect a battery to VBAT

2. Ground PFO

3. Bring VCC above the reset threshold and hold it there until reset is deasserted following

the reset timeout period and

4. Bring VCC down again (Figure 16)

Use the same procedure for the STM818, but ground ECON instead of PFO. Once the

battery freshness seal is enabled (disconnecting the backup battery from internal circuitry

and anything connected to VOUT), it remains enabled until VCC is brought above VRST.

Figure 15. Using a SuperCap™

5V

VCC

VOUT

To external SRAM

STMXXX

VBAT

RST

GND

To µP

Figure 16. Freshness seal enable waveform

VRST

VCC

trec

RST

ECON (Externally held at 0V)

(STM818)

PFO (Externally held at 0V)

(STM817/819)

ECON out state latched

at 1/2 trec, Freshness

Seal enabled

PFO out state latched

at 1/2 trec, Freshness

Seal Enabled

AI08805

AI08806

Doc ID 10522 Rev 10

19/43

Share Link: