TS3022IYST 查看數據表（PDF） - STMicroelectronics
零件编号
产品描述 (功能)
生产厂家
TS3022IYST Datasheet PDF : 20 Pages
| |||
TS3022
Absolute maximum ratings and operating conditions
1
Absolute maximum ratings and operating conditions
Table 1. Absolute maximum ratings (AMR)
Symbol
Parameter
Value
Unit
VCC
VID
VIN
Rthja
Supply voltage (1)
Differential input voltage (2)
Input voltage range
Thermal resistance junction-to-ambient (3)
Rthjc
Thermal resistance junction-to-case (3)
SO-8
MiniSO-8
SO-8
MiniSO-8
5.5
±5
(VCC-) - 0.3 to (VCC+) + 0.3
125
90
40
39
V
°C/W
Tstg
Tj
TLEAD
Storage temperature
Junction temperature
Lead temperature (soldering 10 s)
HBM: human body model (4)
-65 to 150
150
°C
260
5000
MM: machine model (5)
300
ESD
V
CDM : charged device model for TS3022IDT and TS3022IST (6)
1500
CDM : charged device model for TS3022IYST (6)
1400
Latch-up immunity
200
mA
1. All voltage values, except the differential voltage are referenced to (VCC-). VCC is defined as the difference between VCC+
and VCC-.
2. The magnitude of the input and output voltages must never exceed the supply rail ±0.3 V.
3. Short-circuits can cause excessive heating. These are typical values.
4. Human body model: a 100 pF capacitor is charged to the specified voltage, then discharged through a 1.5 kΩ resistor
between two pins of the device. This is done for all couples of connected pin combinations while the other pins are floating.
5. Machine model: a 200 pF capacitor is charged to the specified voltage, then discharged directly between two pins of the
device with no external series resistor (internal resistor < 5 Ω). This is done for all couples of connected pin combinations
while the other pins are floating.
6. Charged device model: all pins and the package are charged together to the specified voltage and then discharged directly
to the ground through only one pin. This is done for all pins.
Table 2. Operating conditions
Symbol
VCC
Vicm
Toper
Parameter
Supply voltage
0 °C < Tamb < +125 °C
-40 °C < Tamb < +125°C
-40 °C < Tamb < 85 °C
Common mode input voltage range
+85 °C < Tamb < +125 °C
Operating temperature range
Value
1.8 to 5
2 to 5
(VCC- ) - 0.2 to (VCC+) + 0.2
(VCC- ) to (VCC+)
-40 to 125
Unit
V
°C
DS6029 - Rev 5
page 2/20
Share Link: 