VV5430 查看數據表（PDF） - STMicroelectronics

零件编号

产品描述 (功能)

生产厂家

VV5430

Monochrome Analog Output CMOS Image Sensors

STMicroelectronics 

VV5430

Control Signals for Image Digitisation

5. Control Signals for Image Digitisation

The VV5430 sensor can be used with an Analog-to-Digital Converter (ADC) and the necessary logic to form an image capture

and processing system. The camera provides an analogue video output together with digital signals to qualify this output and

synchronise image capture.

The signals provided for image capture are the following:-

• PV,PVB: (Pixel Valid, PV Bar) Complementary signals, their leading edges qualify valid pixel levels.

• LST: (Line STart) The rising edge signals the start of a visible line.

• FST: (Field STart) The rising edge signals the start of a field.

• ODD: Identifies an odd field within a frame.

• CPE (Clock Pulse Enable): Disables generation of PV/PVB and LST signals. The state of this pin is sampled

only during a system reset. Its state after reset can be overridden via the serial interface using Set-up Code_2.

The following diagram illustrates the relative timing of the image capture signals. Scale is not actual but edge succession is

preserved.

FST

ODD

LST

AVO

PV

PVB

Todd

Tfst

Tblank

Tlst

Tporch

Tpsu

Tpv

Tphd

Tline

Tfield

Figure 6 : Frame Capture signal timing

13/33

CD5430F-A

Share Link: