1738607-4 查看數據表（PDF） - Tyco Electronics

零件编号

产品描述 (功能)

生产厂家

1738607-4

Industrial Circular Ethernet Panel-Mound Connector System

Tyco Electronics 

Industrial Circular Ethernet Panel-Mount Connector System

408-8933

CONDUCTOR

PAIR

CONDUCTOR

PAIR

For Electrical

Schematic

CONDUCTOR COLOR CODE

(Abbreviation)

T568A T568B

OPTION 1

OPTION 2

4

4

G Blue (BL)

Red (R)

1

White-Blue

5

5

Green (G)

(W-BL)

White-Orange

3

1

Black (BK)

2

(W-O)

6

2

Orange (O)

Yellow (Y)

White-Green

1

3

Blue (BL)

3

(W-G)

2

6

G Green (G)

Orange (O)

White-Brown

7

7

4

(W-BR)

8

8

G Brown (BR)

G A white marking is acceptable.

Figure 3 (End)

Brown (BR)

Slate (S)

For the modular plug, proceed as follows:

a. Maintaining conductor arrangement, insert

the conductors into the load bar (oriented so

that the cable notch of the load bar will align

with the contacts) until the cable jacket rests

against the cable notch. Make sure that the

conductor twist does not enter the front of the

load bar. Trim the conductors evenly and square

with the front edge of the load bar to the

dimension given in Figure 4, Detail A.

b. Retract the conductors from the load bar so

that the conductors protrude from the end of the

load bar to the dimension given in Figure 4,

Detail B. Make sure that the top of the load bar

is not deformed.

NOTE

i

If the load bar is deformed, the conductor twist

entered the front of the load bar.

c. Orient the load bar with the opening of the

modular plug so that the cable notch is aligned

with the contacts. See Figure 4, Detail C.

d. Insert the load bar into the modular plug until

it butts against the mating feature of the

modular plug and the conductors are bottomed

on the wire circuits. Make sure that the cable

jacket is against the cable notch after the load

bar is fully seated. Make sure that the

conductors are not exposed between the cable

jacket and cable notch and the ends of the

conductors are clearly visible through the front

of the modular plug. See Figure 4, Detail D.

Detail A

Terminating Modular Plug

Conductors Inserted

Conductor Twist Does Not

Enter Front of Load Bar

Cable Jacket Against

Cable Notch

Detail B

5.0 mm [2.0 in.]

Conductors Trimmed

Conductors Retracted

Detail C

Contacts

1.0 mm [.04 in.] (Approx)

Conductors Protrude from

End of Load Bar

Modular Plug

Cable Notch Aligned

with Contacts

Load Bar

Detail D

Ends of Conductors Visible

Through Front of Housing

Conductors Bottomed

on Wire Circuits

Conductors Not Exposed

Between Cable Jacket

and Cable Notch

Load Bar Against

Mating Feature

Cable Jacket Against

Cable Notch

Figure 4

Rev D

Tyco Electronics Corporation

3 of 6

Share Link: