MCR12DSM 查看數據表（PDF） - Kersemi Electronic Co., Ltd.
零件编号
产品描述 (功能)
生产厂家
MCR12DSM Datasheet PDF : 7 Pages
| |||
MCR12DSM, MCR12DSN
THERMAL CHARACTERISTICS
Characteristic
Thermal Resistance − Junction−to−Case
Thermal Resistance − Junction−to−Ambient
Thermal Resistance − Junction−to−Ambient (Note 2)
Maximum Lead Temperature for Soldering Purposes (Note 3)
Symbol
RqJC
RqJA
RqJA
TL
Max
Unit
2.2
°C/W
88
80
260
°C
ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise noted)
Characteristics
Symbol
Min
Typ
Max
Unit
OFF CHARACTERISTICS
Peak Repetitive Forward or Reverse Blocking Current (Note 4)
(VAK = Rated VDRM or VRRM; RGK = 1.0 KW)
TJ = 25°C
TJ = 110°C
ON CHARACTERISTICS
IDRM,
IRRM
mA
—
—
10
—
—
500
Peak Reverse Gate Blocking Voltage, (IGR = 10 mA)
Peak Reverse Gate Blocking Current, (VGR = 10 V)
Peak Forward On−State Voltage (Note 5), (ITM = 20 A)
Gate Trigger Current (Continuous dc) (Note 6)
(VD = 12 V, RL = 100 W)
TJ = 25°C
TJ = −40°C
Gate Trigger Voltage (Continuous dc) (Note 6)
(VD = 12 V, RL = 100 W)
TJ = 25°C
TJ = −40°C
TJ = 110°C
Holding Current
(VD = 12 V, Initiating Current = 200 mA, Gate Open)
TJ = 25°C
TJ = −40°C
Latching Current
(VD = 12 V, IG = 2.0 mA)
TJ = 25°C
TJ = −40°C
Turn−On Time
(Source Voltage = 12 V, RS = 6.0 KW, IT = 16 A(pk), RGK = 1.0 KW)
(VD = Rated VDRM, Rise Time = 20 ns, Pulse Width = 10 ms)
VGRM
IGRM
VTM
IGT
VGT
IH
IL
tgt
10
12.5
18
V
−
−
1.2
mA
−
1.3
1.9
V
mA
5.0
12
200
−
−
300
V
0.45 0.65
1.0
−
−
1.5
0.2
−
−
mA
0.5
1.0
6.0
−
−
10
mA
0.5
1.0
6.0
−
−
10
ms
−
2.0
5.0
DYNAMIC CHARACTERISTICS
Characteristics
Symbol
Min
Typ
Max
Unit
Critical Rate of Rise of Off−State Voltage
(VD = 0.67 X Rated VDRM, Exponential Waveform,
RGK = 1.0 KW, TJ = 110°C)
dv/dt
V/ms
2.0
10
−
2. These ratings are applicable when surface mounted on the minimum pad sizes recommended.
3. 1/8″ from case for 10 seconds.
4. Ratings apply for negative gate voltage or RGK = 1.0 kW. Devices shall not have a positive gate voltage concurrently with a negative voltage
on the anode. Devices should not be tested with a constant current source for forward and reverse blocking capability such that the voltage
applied exceeds the rated blocking voltage.
5. Pulse Test: Pulse Width ≤ 2.0 msec, Duty Cycle ≤ 2%.
6. RGK current not included in measurement.
ORDERING INFORMATION
Device
Package Type
Package
Shipping†
MCR12DSMT4
DPAK
369C
16 mm Tape & Reel (2.5 k / Reel)
MCR12DSMT4G
DPAK
(Pb−Free)
369C
16 mm Tape & Reel (2.5 k / Reel)
MCR12DSN−001
DPAK−3
369D
75 Units / Rail
MCR12DSNT4
DPAK
369C
16 mm Tape & Reel (2.5 k / Reel)
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
www.kersemi.com
2
Share Link: 