KDEC(2008) 查看數據表（PDF） - Radiometrix Ltd

零件编号

产品描述 (功能)

生产厂家

KDEC
(Rev.:2008)

Code-hopping receiver with up to 5 relay outputs

Radiometrix Ltd 

Clearing the memory

When the memory is full, no new transmitters can be learned. To clear the memory of all stored

transmitters, the Learn button is pressed and held for more than 6s approx. The Learn LED will go out

and upon releasing the button it will flash once to indicate that the memory has been cleared. It is not

possible to remove individual transmitters from the memory.

Jumper settings

Jumper

Function

T

KDEC Type

M

Relay Mode

Position A

(or not fitted at all)

KFX Keyfob optimised

Momentary

Position B

KTX Module optimised

Latching / Toggled

Jumper T position is only read at power-up and should be set before power is applied.

Jumper M position is read repeatedly during operation and can be changed at any time.

Radiometrix Ltd

Figure 2: Component layout and Dimensions

KDEC

page 3

Share Link: