JRW24S12-830 查看數據表（PDF） - Wall Industries,Inc.
零件编号
产品描述 (功能)
生产厂家
JRW24S12-830
Wall Industries,Inc.
JRW24S12-830 Datasheet PDF : 5 Pages
| |||
Rev. E
JRW Series
Single & Dual Outputs
4:1 Input Voltage Ranges
10 Watt DC/DC Power Converters
MODEL SELECTION TABLES
Model Number
Input Voltage
Range
JRW24S33-2500
Output
Voltage
3.3 VDC
SINGLE OUTPUT MODELS
Output Current
Input Current
Output (4)
Min. Load Full Load No Load (3) Full Load (2) Ripple & Noise
0mA
2500mA
13mA
465mA
50mVp-p
JRW24S5-2000
JRW24S12-830
24 VDC
(9 – 36 VDC)
5 VDC
12 VDC
0mA
0mA
2000mA
830mA
11mA
16mA
548mA
519mA
50mVp-p
50mVp-p
JRW24S15-660
15 VDC
0mA
670mA
26mA
544mA
50mVp-p
JRW48S33-2500
3.3 VDC
0mA
2500mA
10mA
239mA
50mVp-p
JRW48S5-2000
48 VDC
5 VDC
JRW48S12-830 (18 – 75 VDC) 12 VDC
0mA
0mA
2000mA
830mA
9mA
9mA
270mA
259mA
50mVp-p
50mVp-p
JRW48S15-660
15 VDC
0mA
670mA
11mA
262mA
50mVp-p
Output
Power
8.25W
10W
10W
10W
8.25W
10W
10W
10W
Efficiency (4)
Maximum (5)
Capacitive Load
78%
6800µF
80%
4700µF
84%
690µF
81%
470µF
76%
6800µF
81%
4700µF
84%
690µF
84%
470µF
DUAL OUTPUT MODELS
Model Number
Input Voltage
Range
Output
Voltage
Output Current
Input Current
Output (4)
Min. Load Full Load No Load (3) Full Load (2) Ripple & Noise
JRW24D5-1000
JRW24D12-420
JRW24D15-330
24 VDC
(9 – 36 VDC)
±5 VDC
±12 VDC
±15 VDC
0mA
0mA
0mA
±1000mA
±416mA
±333mA
15mA
15mA
22mA
534mA
547mA
548mA
75mVp-p
75mVp-p
75mVp-p
JRW48D5-1000
JRW48D12-420
JRW48D15-330
48 VDC
(18 – 75 VDC)
±5 VDC
±12 VDC
±15 VDC
0mA
0mA
0mA
±1000mA
±416mA
±333mA
12mA
20mA
20mA
267mA
281mA
270mA
75mVp-p
75mVp-p
75mVp-p
Output
Power
10W
10W
10W
10W
10W
10W
Efficiency (4)
Maximum (5)
Capacitive Load
82%
±680µF
80%
±330µF
80%
±110µF
82%
±680µF
78%
±330µF
81%
±110µF
NOTES
1. BELLCORE TR-NWT-000332. Case 1: 50% Stress, Temperature at 40°C.
MIL-HDBK-217F Notice2 @Ta=25°C, Full load (Ground, Benign, controlled environment).
2. Maximum value at nominal input voltage and full load.
3. Typical value at nominal input voltage and no load.
4. Typical value at nominal input voltage and full load.
5. Test by minimum Vin and constant resistive load.
6. The on/off control pin is referenced to –Vin.
To order positive logic remote on/off, add the suffix “P” to the model number (Ex: JRW24S15-660P).
To order negative logic remote on/off, add the suffix “R” to the model number (Ex: JRW24S15-660R).
7. “I” type models are more efficient; therefore, they can be operated over a more extensive temperature range than the standard version.
To order extended operating temperature range, add the suffix “-I” to the model number (Ex: JRW24S15-660-I).
8. Heatsink is optional and P/N: 7G-0020C-F.
9. The JRW series can meet EN55022 Class A with external capacitors in parallel connected to the input pins.
Recommended: 24Vin: 2.2µF/50V 1812 MLCC
48Vin: 1.5µF/100V 1812 MLCC
10. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor suggested is
Nippon chemi-con KY series, 220μF /100V, ESR 48mΩ.
CAUTION: This power module is not internally fused. An input line fuse must always be used.
*Due to advances in technology, specifications subject to change without notice.
04/25/2012
Wall Industries, Inc. 37 Industrial Drive Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
Page 3 of 5
Share Link: