A8837 查看數據表（PDF） - Allegro MicroSystems

零件编号

产品描述 (功能)

生产厂家

A8837

Photoflash Capacitor Charger with IGBT Driver

Allegro MicroSystems 

A8837

Photoflash Capacitor Charger with IGBT Driver

Operation Timing Diagram

VUVLO

VIN

CHARGE

SW

Target VOUT

VOUT

DONE

TRIGGER

IGBTDRV

A

B

C

D

E

F

Explanation of Events:

A. Start charging by pulling CHARGE to high, provided that VIN is above the VUVLO level.

B. Charging stops when VOUT reaches the target voltage. ¯D¯¯O¯¯N¯¯E¯ goes low, to signal the

completion of the charging process.

C. Start a new charging process with a low-to-high transition at the CHARGE pin.

D. Pull CHARGE to low, to put the controller in low-power standby mode.

E. Charging does not start, because VIN is below VUVLO level when CHARGE goes high.

F. After VIN goes above VUVLO, another low-to-high transition at the CHARGE pin is

required to start charging.

IGBT Drive Timing Definition

TRIGGER

IGBTDRV

50%

tDr

tr

90%

10%

50%

tDf

tf

90%

10%

Allegro MicroSystems, Inc.

5

115 Northeast Cutoff, Box 15036

Worcester, Massachusetts 01615-0036 (508) 853-5000

www.allegromicro.com

Share Link: