Philips Semiconductors
Multi-purpose power amplifier
Preliminary specification
TDA8580J
FEATURES
General
• Supply voltage range from 8 to 24 V
• Low distortion
• Few external components, fixed gain
• High output power
• Can be used as a stereo amplifier in Bridge-Tied Load
(BTL) or quad Single-Ended (SE) amplifiers
• Single-ended mode without loudspeaker capacitor
• Mute and standby mode with one- or two-pin operation
• Diagnostic information for Dynamic Distortion Detector
(DDD), high temperature (145 °C) and short-circuit
• No switch on/off plops when switching between standby
and mute or mute and on; an external RC-network is
prescribed to ensure plop-free operation
• Low offset variation at outputs between mute and on
• Fast mute on supply voltage drops.
Protection
• Short-circuit proof to ground, positive supply voltage and
across load; the supply voltage ranges where the
different short circuit conditions are guaranteed are
given in Chapter “Limiting values”
• ESD protected on all pins
• Thermal protection against temperatures exceeding
150 °C.
GENERAL DESCRIPTION
The TDA8580J is a stereo Bridge-Tied Load (BTL) or a
quad Single-Ended (SE) amplifier that operates over a
wide supply voltage range from 8 to 24 V. This makes it
suitable for applications such as television, home-sound
systems and active speakers.
Because of an internal voltage buffer, this device can be
used without a capacitor connected in series with the load
(SE application). A combined BTL and 2 × SE application
can also be configured (one chip stereo and subwoofer
application).
ORDERING INFORMATION
TYPE
NUMBER
TDA8580J
NAME
DBS17P
PACKAGE
DESCRIPTION
plastic DIL-bent-SIL power package; 17 leads (lead length 12 mm)
VERSION
SOT243-1
2000 Apr 18
2