CXA1853AQ
No.
Item
122 RGB GAIN
adjustment range (1)
RGB GAIN
123 adjustment range (2)
R GAIN
124 adjustment range (1)
R GAIN
125 adjustment range (2)
126
B GAIN
adjustment range (1)
127
B GAIN
adjustment range (2)
Symbol
Measurement conditions
Min. Typ. Max. Unit
∆GCS1
∆GCS2
Set SW41 → ON, V41 = 1.6V, V42 = 0V,
V54 = 0V and input SG1 (0 dB) to (TEST IN).
Then adjust V45 so that the non-inverted
output amplitude (black to white) at TP16 is
5 times the input signal amplitude and label
this as VI.
Input SG1 (–6 dB) to (TEST IN) and label the 4.0 6.0 — dB
non-inverted output amplitudes (black to white)
at TP15, TP16 and TP17 with V45 = VI as
VRST, VGST and VBST, and the inverted output
amplitudes as VRSTA, VGSTA and VBSTA,
respectively.
Next, label the non-inverted output amplitudes
(black to white) at TP15, TP16 and TP17 with
V45 = 5.0V as VRSM, VGSM and VBSM, and the
inverted output amplitudes as VRSMA, VGSMA
and VBSMA, respectively.
Next, label the non-inverted output amplitudes
(black to white) at TP15, TP16 and TP17 with
V45 = 1.6V as VRSN, VGSN and VBSN, and the
inverted output amplitudes as VRSNA, VGSNA
and VBSNA, respectively.
— –6.0 –4.0 dB
∆GCS1 = 20log (VRSM (A)/VRST (A))
= 20log (VGSM (A)/VGST (A))
= 20log (VBSM (A)/VBST (A))
∆GCS2 = 20log (VRSN (A)/VRST (A))
= 20log (VGSN (A)/VGST (A))
= 20log (VBSN (A)/VBST (A))
∆GRS1
∆GRS2
Set V42 = 0V, V54 = 0V, input SG1 (–6dB)
to (TEST IN), and set V45 = VI, SW46 → ON,
SW41 → ON, V41 = 1.6V and V46 = 5.0V.
Then label the non-inverted output amplitude
2.5
4.6
—
dB
(black to white) at TP15 as VRSTM and the
inverted output amplitude as VRSTMA.
Next, label the non-inverted output amplitude
(black to white) at TP15 with V46 = 1.6V as
VRSTN and the inverted output amplitude as
VRSTNA.
— –4.6 –2.5 dB
∆GRS1 = 20log (VRSTM (A)/VGST (A))
∆GRS2 = 20log (VRSTN (A)/VGST (A))
∆GBS1
∆GBS2
Set V42 = 0V, V54 = 0V, input SG1 (–6dB)
to (TEST IN), and set V45 = VI, SW47 → ON,
SW41 → ON, V41 = 1.6V and V47 = 5.0V.
Then label the non-inverted output amplitude
2.5 4.6
—
dB
(black to white) at TP17 as VBSTM and the
inverted output amplitude as VBSTMA.
Next, label the non-inverted output amplitude
(black to white) at TP17 with V47 = 1.6V as
VBSTN and the inverted output amplitude as
VBSTNA.
— –4.6 –2.5 dB
∆GBS1 = 20log (VBSTM (A)/VGST (A))
∆GBS2 = 20log (VBSTN (A)/VGST (A))
– 15 –