28F016XD FLASH MEMORY
E
NOTES:
1. All currents are in RMS unless otherwise noted. Typical values at VCC = 3.3V, VPP = 12.0V or 5.0V, T = +25°C.
2. ICCES is specified with the device de-selected. If the device is read while in erasesuspend mode, current draw is the sum of
ICCES and ICC1/ICC4.
3. Block erases, word programs and lock block operations are inhibited when VPP = VPPLK and not guaranteed in the ranges
between VPPLK(max) and VPPH1(min), between VPPH1(max) and VPPH2(min) , and above VPPH2(max).
4. Automatic Power Saving (APS) reduces ICC1 and ICC4 to 3.0 mA typical in static operation.
5. CMOS inputs are either VCC ± 0.2V or GND ± 0.2V. TTL inputs are either VIL or VIH.
6. Sampled, but not 100% tested. Guaranteed by design.
24